This post will help you to build, configure and set up the tank level monitor using ESPHome in Home Assistant. This project was created with the home DIY’er in mind. Since the SMD components are so ...

These devices have key drawbacks. Water level indicators require manual pump operation and often waste power as multiple LEDs ...

method to measure the total liquid level inside the tank. API MPMS chapter 3.1A covers the procedure and requirement for manual gauging, which is normally three consecutive readings with a difference ...

[Renzo Mischianti]’s friend has to keep a water tank topped up ... with a solar-powered sensor that communicates over LoRa, and a controller that receives the water level readings and powers ...

This is a websocket server to monitor the water level in a tank using an ultrasonic sensor. The sensor runs in serial mode & samples the tank level at 10Hz, the websocket server streams an average ...

Enclosed are the ultrasonic sensor, a temperature sensor and an ... [Mike] can now wirelessly access the tank oil level log from his computer.