The chart below can be used to determine the equivalent sheet thickness, in inches or millimeters, for a gauge number from the selected gauge size standard. The weight per unit area of the sheet can also be seen in pounds per square foot and kilograms per square meter.

GAUGE TO THICKNESS CHART (Click here for a printable PDF chart) Gauge. Stainless. Galvanized. ... 16. 1/16. 0.0595 (1.511) 0.0635 (1.61) 0.0598 (1.52) 0.0508 (1.29) 15 . 0.0703 (1.8) 0.0710 (1.80) 0.0673 (1.71) 0.0571 (1.4) 14. 5/64.

What is 16 gauge thickness in mm? When working with sheet metal, the term “gauge” is often used. Gauge are used to specify the thickness of a metal sheet. Gauge (Ga.) is a length measurement unit for diameters originating in North America and belongs to the Browne & Sharpe metering system.

For example, a 16 gauge CRCA sheet metal measures 1.5 mm thickness. Whereas, a 16 gauge aluminum sheet measures 1.3 mm thickness. This article can help engineers in sheet gauge number to mm or inch conversion.

The following sheet metal gauge size reference chart gives the weight and thickness of sheet metal given as a "gauge" (sometimes spelled gage) and indicates the standard thickness of sheet metal and wire.For most materials, as the gauge number …

2024年7月26日 · For example, 16-gauge steel is approximately 1.52 mm thick, while 16-gauge aluminum is about 1.29 mm. Importance of Verification: Always confirm the precise thickness with your material supplier, particularly for polished, coated, or heat-treated materials. Surface treatments can slightly alter the final thickness.

2021年3月18日 · For example, 18-gauge sheet metal made from aluminum is 0.040 inches, 20-gauge sheet metal made from aluminum is 0.032 inches, and 16-gauge sheet metal made from aluminum is 0.050 inches. The difference in thickness between 18-gauge and 20-gauge is 0.008 inches, while the difference in thickness between 18-gauge and 16-gauge is 0.010 inches.

2025年1月15日 · The thickness of 16 gauge steel is generally around 0.0598 inches (1.519 mm) for standard steel. However, there are slight variations depending on the type of steel. For galvanized steel, which includes a thin zinc coating, the thickness is …

2025年1月18日 · 16 gauge steel is approximately 0.0598 inches (1.518 mm) thick for carbon steel and about 0.0625 inches (1.587 mm) for stainless steel, while 16 gauge aluminum is significantly thinner at around 0.0508 inches (1.29 mm).

2025年1月17日 · The thickness of 16 gauge steel varies slightly depending on the type of steel: for standard steel, it is approximately 0.0625 inches (1.519 mm), for galvanized steel, it is about 0.063 inches (1.613 mm), and for stainless steel, it is roughly 0.063 inches (1.588 mm).