2008年4月28日 · Boy, much simpler than pulling the motor out of 74 Midget was. With no front bodywork, it just slid right on out. I was temporarily worried about where I would put it, but then …

MK1 Sprite engine and transmission removal. - Bugeye Build Episode 2. The engine and transmission are out of the car and we have a look for broken teeth!Follow this adventure with …

2014年12月19日 · Lay the intake on the driver's side fender. Remove the generator, radiator, distributor, and oil filter. Don't take the bonnet off. That way the engine and transmission can …

2013年9月8日 · Complete factory instructions as follows. Disconnect the earth lead from the battery and remove the bonnet from the bonnet hinges. Remove the radiator header tank filler …

2019年2月3日 · Anyone got a copy of that ~25 step or so, How to Remove a Spridget Engine Checklist. I'm sure I can do it by rote memory but wanted a checklist to make sure a step is not …

2015年12月27日 · Disconnect 4 bolts at rear and it pulls straight out. Drain tranny before you pull it out or several pints will come out when you tilt engine to remove.

I followed the Haynes guide for the engine removal, and it was surprisingly easy. First I drained and removed the radiator. Then I disconnected a half dozen wires and cables. I was careful to …

2016年3月7日 · Disconnect the intake manifold from the engine and lay it over on the inside wing (no need to remove cables). Remove the exhaust manifold. Remove the radiator. Short couple …

2021年9月14日 · If you saw my previous post, I had worked out that I had installed the clutch plate backwards. I decided that I would try to remove the engine only rather than remove it …

The black oil and fuel residue is not that easy to remove, so we used a hydraulic press to remove the gudgeon pins from pistons, placed the pistons in an ultrasonic cleaner for about 15 …