2013年10月12日 · Press and hold the RESET button for 2 seconds and release to reset the oil life to 100%. The message center displays SETUP MENU HOLD RESET. Oil Life Reset - Base Instrument Cluster NOTE: The oil life calculation is set at a maximum of approximately 8,000 km (5,000 miles) or 180 days. Place the ignition in the RUN position with the engine off ...

2013年4月27日 · The oil filter every oil change (every 5000 clicks on conventional filter). The air filter - urban driving - every other oil change. The fuel filter - good name brand fuel - every 100,000 clicks, not so good brand of fuel - every 50,000 clicks (cheaper fuel or old gas stations can present more contaminants -- as can an old cars gas tank interior).

Press your reset button on the on board diagnostics which is located on the dash, keep pressing the rest button until you see "oil life" once you come to the oil life, hold the reset button until it reads "Oil Life 100 percent" release the reset button, shut the vehicle off then re start it, that will turn off the message in the message center telling you to change your oil.

SOURCE: Service Engine Soon light reset. The Service Engine Soon light comes only when the engine computer control unit (called the PCM) senses a fault in the electronic controls of the engine and/or the emission system, it is not related to the oil change, there are about 200 possible faults that turn the light on, to know what has developed a problem you must have the system …

2009年11月19日 · SOURCE: How do I reset oil life % change oil message on my. The procedure is as follows: Turn ignition to the "ON" position. Press "SETUP" button. Press "RESET" button. Press and hold "RESET" button until "IF NEW OIL HOLD RESET" is displayed. Press and hold "RESET" button until "OIL LIFE RESET TO 100%" is displayed. I hope this answers your ...

2013年3月14日 · Press the select/reset knob repeatedly until the engine oil life is displayed. Press the select/reset knob for about 10 seconds. The engine oil life and the maintenance item code(s) will blink. Press the select/reset knob for another 5 seconds. The maintenance item code(s) will disappear, and the engine oil life will reset to 100.

2019年2月26日 · 2009 Ford Edge: How to troubleshoot Check Park Aid fault. have it checked for DTC'S - diagnostic trouble codes .The module is located behind the left rear plastic panel . You haven't a clue about this , your best bet , take your vehicle to a qualified repair shop .

2019年1月7日 · On 3.4L DOHC engines the sensor is screwed into the oil filter adapter. The oil pressure sensor operates the oil pressure warning lamp. Fig. 1: Location of the oil pressure sensor-3.0L OHV engines Fig. 2: Location of the oil pressure sensor-3.0L DOHC engines Fig. 3. The oil pressure sensor-3.0L OHV engine Hope help with this (remember rated ...

reset the oil life feature to 100% (or your Personalized Oil Reset Percentage). After you have the oil changed, you must execute the following procedure. Press the OIL CHANGE RESET switch and hold for five seconds as the M/C counts down for five seconds. After a successful reset the Message Center will display “OIL LIFE RESET TO 100%.”

2017年6月13日 · SOURCE: 2011 Ford Edge was purchased. I had the same problem after 5 months of purchasing a 2011 Edge. The Oil Engine Pressure light comes on and stays on after driving 10 minutes and stopping for gas- it turns off shortly after I start driving again. I had a 2007 Edge as well and never had this problem. I just took the 2011 Edge back to the ...