2019年11月19日 · To replace the stroller wheels, you usually have to loosen the locking axle nut, and then proceed with replacing the tires. Here’s how to replace the front wheels on a stroller . Some strollers have plastic tabs on the front wheel.

2017年4月18日 · Remove the broken wheel. If there is a secondary retention button near the quick-release lever, push on it to remove the wheel from the rear axle. Depending on the type of stroller you have, it may have a ring, fork plate, holding plate and/or adjusting nut that you need to remove with the wheel. Slide the new wheel into the stroller’s rear axle.

2025年1月18日 · Loosening the axle nuts on both sides of the wheel is a crucial step in the process of removing the wheels from a Thule double stroller from an older model. These axle nuts are responsible for securing the wheels to the stroller frame, and loosening them is necessary to allow the wheels to be pulled off the axles.

Replacing the wheels on your Twin, Trio, or Tribe stroller is easy-peasy, and it requires no tools!. To remove front wheels, press the black release button and pull wheel away from the shaft. After existing wheels are removed, install new wheel by in

2024年8月9日 · Removing the Wheel from the Axle . To remove the wheel from the axle, you will need to: Rotate the wheel so that the axle is perpendicular to the ground. Squeeze the two tabs on the axle together. Pull the wheel straight towards you to remove it from the axle. Tip: If the wheel is difficult to remove, you can try using a pair of pliers to ...

To remove the rear wheel, press the silver rear wheel release button located at the side of the rear axle, then pull the wheel away from the shaft. After existing wheels are removed, install new wheel by inserting the metal pin into the black tube on each end of rear wheel axle until you hear an audible click.

After existing wheels are removed, install new wheel by inserting the metal pin into the black tube on each end of rear wheel axle until you hear an audible click. To confirm new wheels are locked in place, pull each wheel away from the stroller body. Properly installed wheels will not detach without pressing release buttons.

2021年12月21日 · How to remove BOB stroller wheels. If the rear wheel is flat, be sure to disengage the parking brake before removing it. To remove the wheel, open the quick release lever on the BOB stroller, then remove the wheel. You may need to press a secondary lever to remove the wheel, if you BOB stroller model has one.

OPENING THE STROLLER TO ASSEMBLE REAR WHEELS Step 1. Slide wheel assembly onto axle. Step 2. Slide washer onto axle. Step 3. Fit straight part of cotter pin through hole on axle. Step 4. Line up each of the tabs in the hub cap with the slots in the wheel, snap hub cap into place. Step 5. Repeat for other side. Spread the canopy apart to the ...

Front Wheel Removal 1 Open Quick Release Lever Move the wheel’s quick release lever from the locked or FULLY CLOSED position to the FULLY OPEN position. 2 Remove Through Axle Loosen the tension adjusting nut and remove the through axle from the front wheel and fork. 3 Remove Front Wheel Raise the front wheel a few inches