2021年3月2日 · I mounted a scope on my new break-barrel airgun, and used small pieces of painter's tape on the inside of the rings. I'd heard it helps to prevent slippage under recoil. Rings tightened to 21 in.lb. with Loctite Blue.

2021年8月13日 · The Vortex Diamondback Tactical FFP 6-24x50 is a decent entry-level tactical/target scope for .22LR. I put one on my Remington 541S Custom Sporter to explore its capabilities at longer .22LR distances (out to 250-300;yards). The rifle is sub MOA capable with Eley Match and Lapua Center-X. My opinion is that the scope is fine, but not great.

2024年4月12日 · Big objective bells let in light and increase resolution, but require tall rings. Personally, I found that for most of the casual target shooting that I do with my Marauder and Armada, the Hawke Sidwinder Tactical 10X fixed power scope with half mil-dots works quite well.

2024年2月10日 · From the listing "Designed to withstand the heaviest recoil - Our LT107 QD scope mount was designed by request for the U.S. Army M107 Military Long Range Sniper Rifle LRSR.50 Cal. We built-in 30 minutes of slope to get the most out of the scope's "come-ups".

2018年8月30日 · I tried using med & high 30mm Weaver rings and mocked up my 4.5-14x40 scope tonight. I took a couple of pictures (which I can't seem to get posted) showing the clearances. With the medium rings the clearance is minimal, about 1mm clearance between the scope and handguard whereas the high rings gave about 3mm clearance.

2016年2月6日 · For regular scope rings for something like a heavy bolt action, I use Badger steel rings, for a lightweight rifle, NF ultralight alloy rings, and for anything on an AR I only use ADM mounts. Have several sets of each and never an issue with thousands of rounds through each.

2017年7月22日 · I have two AR10's...16" and 20"...and have a one-piece, aluminum, Burris cantilever on the 20" and a set of Warne, individual, steel rings on the 16". There are some strong arguments for those with precision bolt rifles with steel receivers and steel scope attachment points on the receiver, that steel rings are best.

2011年12月14日 · The eyepiece and power ring (or lock ring) are larger diameter than the tube: if they sit above the rear sight, you'll have to go even higher on rings. I can see only 2 1/2 ways to keep an aperture rear sight and have a scope mounted low over the receiver. Option 1 is to find a scope with generous eye relief and mount it in front of the rear sight.

2018年5月1日 · Vertical split rings are mounted much different than horizontally split rings. To mount a scope in vertical splits, you'll place the scope in the rings and tighten the bottoms to 18-20 inch pounds (yes, this is a bit higher than we normally recommend. But, keep reading). Then, you'll move to the top and tighten that to about the usual 16 inch ...

2019年3月15日 · I have low rings on a 40mm objective scope and theres only 1/16” clearance! This tight clearance is primarily due to the 20MOA cant of the picatinny rail. So Medium and maybe even High for your purposes. Cheers