2002年4月21日 · "Tried & True Wood Finishes are based in a polymerized linseed oil system. Essentially polymerization is a process that the oil goes through (naturally) as it turns from a liquid to a solid. When you apply Tried & True, heat, light and polishing complete the process, leaving a clear, thin, flexible finish.

2021年12月7日 · 26. Can I use Tried & True over shellac/polyurethane/wood fillers/wax-based finishes Shellacs – Tried & True products are compatible with shellac used as sanding sealer. Do not mix them together, generally Shellac is used as a pore filler, sanded down, and then Tried & True over top for the finishing coat.

I followed these directions to finish a cherry bookcase. 1st coat was a thin layer of shellac to control blotching. 2nd coat was straight Tried & True danish oil. 3rd and 4th coats were a mixture of 1/3 "Indian" spar varnish (expensive) + 2/3 Tried and True varnish. I waited at least 2 days between very very thin coats.

2006年11月1日 · All Tried & True Wood Finishes comply with the inner most circle of product safety established by the FDA: "safe for food contact surfaces" (FDA 21,Sec 175.300). Beeswax and natural varnish resin are FDA approved as non-toxic and non-allergic.

2005年1月13日 · I use the Tried and True original finish, which is the beeswax and natural linseed oil stuff. What I do is place the can in the top half of an old double boiler I got at an auction sale, and heat it up till the thick viscous stuff is clear, it is not real hot just warm but it goes on much better and the coats are thin.

2024年6月24日 · The one-part products are Briwax Hard Wax Oil, Bumblechutes Bee’Nooba Wax, Fiddes Hard Wax Oil, Odie’s Oil, Interbuild Hardwax Oil, Osmo Polyx-Oil, and Tried & True Original Wood Finish. The two-part products are General Finishes Hard Wax Oil, Natura Onecoat Wood Oil 2K, Osmo 2K Wood Oil, Rubio Monocoat, and Rustic Lumber Furniture Oil.

2005年1月26日 · 2. Most of the time I use Danish Oil or the Original Wood Finish. Even when I use the latter, the first coat is Danish. I usually add a little of the Danish Oil to the Original Finish when I use it. I have chatted with the maker of T&T and as I recall he suggested these techniques. Since I am pleased with the results, I continue to use them.

2005年5月22日 · Tried and True, like other "oils" (tung, linseed, lemon etc.) is an "in the wood" as opposed to a surface finish like varnish or lacquer. The thing that seperates T&T from other "Danish Oils" is the fact it does not have any metallic driers like Watco etc. so it is going to take much longer to dry.

2002年6月19日 · When I first started using Tried & True I had the same problem. I decided to be more patient and apply very thin coats. The results are worth the wait I have customers who insist on this finish after seeing samples I have in the shop. It really is a handsome finish IMHO.

2021年10月9日 · The Tried and True Varnish Oil is "<75% polymerized linseed oil", and "<25% natural resin", which the manufacturer describes as pine resin. My short answer to the OP's question is that I see no reason to use the steel wool before the first coat on a …