For example, if you specify device-count 3, you would be able to configure ae0, ae1, and ae2. If you want to start at ae10, you would need to specify 11 ( since numbering starts at 0).

2024年5月13日 · I am trying to simulate ae interfaces in Juniper vLabs. I am running into an issue where the output of "show lacp interfaces ae0" shows the following. The ae interface is down.

Dear all, When I'm creating an aggregated link of 2Gbpbs towards another switch I get the following error: root@juniper_switch_1# commit check [edit interfaces g

show interfaces extensive ae0.0 | find "LACP Statistics" . Counter under LACP RX and LACP TX is evidence that all is well. LACP exchanges are made between actors and partners. An actor …

I'd like to temporarily mix 10Gb and 40Gb interfaces on an ae interface during an upgrade--can I safely do this? What do I set link-speed to? --Paul

Hello, I have an ae interface setup on an EX4500. However when I do a run show interfaces terse it does not show up. When I try show interfaces ae0 terse

MX204 Two interfaces ae0 and ae1 Two VLANS, 10 and 20 Logical-system "B" VLANS 10 and 20 should be bridged between interfaces ae0 and ae1 within logical system B.

Hi All, I have set up two vMX routers, activated the trial license, configured lite-mode for the FPCs, and set network-services to enhanced-ip Running these vmX on KVM with virtio-net-pci …

I've got a MX104 and an ae0 constisting of 2x 10GE interfaces with "flexible-vlan-tagging" and "encapsulation flexible-ethernet-services". I now want VLAN 333 to be terminate on local …

1. LACP keep flapping on ae0 link 0 Recommend Archived User Posted 04-09-2013 22:21 Reply Reply Privately Options Dropdown Hi Team,