1. The engineering process is a amazing way to get a successful and working machine or product. The engineering process has 8 main steps to get you...

2. When I decided to start designing and building a combat robot I decided on a shell spinner design. After designing and building the shell spinne...

3. If you are just starting out with designing and building combat robots I would recommend choosing a robot type from the list of simple combat ro...

4. Determining constraints is extremely important before starting you design. A constraint is a limitation or restriction that you design has to fo...

5. When starting your design you want to take the dimensions of the electronics you are using into mind. I will take all of my electronics and put...

6. After getting my basic design done I decided to start working on the acrylic plates I wanted to use for the motor mount and chassis. I also upda...

7. In order to finish my design I needed a top cover and mounting holes for the frame. To create the top cover I made a copy of the bottom plate an...

8. The entire robot took around 8 hours to print at a 0.3mm layer height and 75% infill. The filament I used is the Creality black PLA. I also prin...

9. The ports M1 and M2 on the dual ESC get soldered to the N20 motors. The battery leads from both ESCs get soldered to a battery port and the rece...

10. Attach the bottom cover to the main chassis with 4 screws.Attach the 2 side walls to the bottom cover with 2 screws.Assemble the wheels and att...