rear end narrowing - S-10 Forum
2008年3月10日 · I am going to narrow the nova rear end. put my s10 axles in. The rear end shop I spoke with told me that would be the best route to go, other than buying axles. They said that axles are only hardend on the splines. If you cut them and …
Narrowing frame on s10 - Hot Rod Forum
2008年8月16日 · What would be the best way to go about narrowing the frame on my s10 in order to fit a larger drag slick.
frame modification for narrow rearend - S-10 Forum
2007年10月20日 · I am planning on putting a narrowed rearend in my truck to accomodate rather wide tires. I have a pretty good idea how this needs to go. I have attached an extremely basic picture of what I have in mind here.
narrowing a rear end - S-10 Forum
2006年2月11日 · Take a early 8.5 say a (camaro trans am rear) procure 2 ....28 spline axles out of a 2wd s/10 and have the axle tubes narrowed accordingly. A little known fact is that the long axle on a 28 spline 4x4 s/10 is a bolt in (except the metric studs) for 8.5 Nova early Camaro rears.
S10 Rear ends---Info by Ben - T-Bucket Forums
2015年1月30日 · Chevrolet S10/ GMC Sonoma rear axles are a great choice for small lightweight Hot Rods such as a T-Buckets or early roadsters. These rear ends were made for many years and are plentiful and inexpensive to buy in junkyards all over. Nearly every part is available as a replacement from all of the standard auto parts retailers.
Calling all Pro-Street Back-half frame experts. | Hot Rod Forum
2021年11月8日 · I acquired another back half of a S10 frame and that is the one I will be narrowing and installing inside the stock and wider frame for perfect alignment. Once I have the modified frame in place, I will reinforce it, weld it in place and then cut …
s10 rear end chop - Hot Rod Forum
2012年8月17日 · Narrowing a rear end requires some special tools. You must have a housing fixture to hold everything in line with the differential bearing bore. You also need very good welding skils. The S10 has about 12 inches of room between the bed side and frame rail.
350 s10 rear end - S-10 Forum
2009年4月23日 · The rear end will likely cost you less than just a good posi. They are wide, like for a 4X4, but you can easily shorten the longer axle tube yourself and then use 2 short axles. Wheel bolt pattern is Ford of course, that can be re-drilled for the S10.
Narrow s10 4X4 8.5 rear end - Chevy Nova Forum
2024年7月1日 · pretty popular to take the explorer 8.8 rear and cut an 1 7/8" out of the drivers side axle tube. this allows you to use a passenger side axle on the drivers side and get the pinion centered. you will end up with a 56.25" rear instead of the stock 57.75"
Mini tubing and or Rear end narrowing | Chevy Nova Forum
2016年5月23日 · research S10 rearend install. with mini-tubing and s10 rear end you can fit 275 with no issues. 255 can be had with s10 but you will need the correct BS. some s10 rears also con in 8.5. I have the smaller 7.6 mini tub and relocated leafs with …