2010年5月20日 · It may not seem that there is any pressure, but only a few pounds of pressure will make the coupler seem like it is frozen. The common remedy is to hold a blunt object (pin punch, rod, or the like) against the inside nipple and rap …

2009年1月28日 · My friends big John Deere keeps blowing out the hydraulic hose to implements from one of the rear remotes. The female inside of the remote looks normal, as does the male hose end connector. But when a load is on the line, it blows off the hose.

For a variety of different reasons, hydraulic pressure can build up and cause the couplers to be really difficult or even impossible to connect. We’ll show you how to fix this issue if it does...

2020年8月24日 · This will tell you if there is a coupling problem or a pressure problem in the suspect coupling holding the ball. Every now and then my 5065E exibits the same problem. I carry a dowel with me along with a shop cloth in my tool box to educate it.

2017年4月30日 · The last couple of days been having trouble with hoses popping out of the outlets. Seems to happen more often with a bigger rock on the reel, not always though. Sometimes it will blow the other hoses not even be used. JD dealer changed the one set of couplers and hose ends, no change. 800 hrs on tractor, running at 1200 rpms.

2014年3月13日 · Symptoms: After changing the three couplers on my BX2200, no hydraulic function worked correctly, except things on priority flow such as the power steering, PTO, and hydrostat set. The lift would not function. The Loader would not function correctly.

This video shows how to repair John Deere AM115139 hydraulic Quick Connect couplers. These couplers are used on the 4X5 and X Series garden tractors. It inc...

2012年9月24日 · This tractor had a new hydraulic pump installed by John Deere techs a year or so ago. Dad is 84 years old and hopefully he just over looked something like a disconnected hydraulic hose. What should I look for?

2015年11月9日 · Our dealer seemed very familiar with the problem, as did the JD dealer (we called JD dealer to see if it could be a drill problem). Both the Deere dealer and the Case dealer immediately suspected the female coupler in the hydraulic remote.

2023年12月25日 · The hydraulic lines are very difficult to connect and/or disconnect. Maybe I'm just getting old and weak but to connect or disconnect these lines are a real difficult process. I'm fully aware of the process to release the pressure on the lines by shutting off the tractor and moving stick around, so this is not the problem.