Matrix is a customisable seating system that can be used for both simple support through to corrective postural management for wheelchair users. It is composed of small inter lockable components which can all be adjusted to allow for complex customised shapes, clinical change and …

Full Matrix Kits Left: Back Kit (includes Matrix Back, two Pivots for mounting the Back to a wheelchair, screwdriver, Matrix Key, and a cover) Below: Sheet Kit (includes Matrix Sheet, four Pivots for mounting the Sheet to a wheelchair, screwdriver, and a Matrix Key)

Matrix goes back to Source to manufacture its innovative seating structure for wheelchair users A Plymouth manufacturer is playing a key role in helping develop a new seating system for wheelchairs that improves function and corrects body posture.

track, a 15 cm ramp and drop appeared to simulate the wheelchair being bumped down a curb. The Matrix system successfully finished the test (16,125 revolutions) without visible damage. Table 2 summarises the test results. These include the static tilt tests of the Matrix shell/Wheelchair combination and the statistics of the five-year life ...

2021年10月7日 · Source Engineering aided Matrix Seating with a complex stamped part that acts as a locking clamp for the micro modules that are shaped to improve function and correct body posture.

The Moun%ng Blocks a ach to the wheelchair tubing / frame, and they hold the Arms. Product codes and sizes are shown above. The MBR-UE is a pair of universal Moun%ng Blocks which can be used for mul%ple sizes, and is used when the exact diameter of the wheelchair back tubing is not known in advance. If tubing sizes are larger, i.e. 25 or 32mm, then

If the head support needs removing for wheelchair for folding or to transfer the user in or out of the wheelchair, refer to the instructions supplied with the mounting hardware.

Source Engineering aided Matrix Seating with a complex stamped part that acts as a locking clamp for the micro modules that are shaped to improve function and correct body posture. The five engineer-team worked with inventor Dr Steve Cousins […] Precision stamped part aids new wheelchair design

If a wheelchair with the Pivot is used as a seat during transporta on a risk assessment should be carried out. When fi$ng the Pivot to various supports make sure the correct interface is used.

If the Heads First is dropped or the wheelchair falls over, visually inspect for damage or any changes to the delivered shape. Replace damaged components and reshape as required. Check alignment/ positioning/fitting/removal of components and re-adjust as neces-sary.