Wand and Remote Motorization Thank you for purchasing motorized shades. This manual includes set up, programming, and troubleshooting information for wand and remote motorized shades. We recommend keeping this manual after your shades are installed and operating correctly for referencing back programming and troubleshooting information. CONTENTS:
When remote is out of reach, the shade can be operated by One-Touch function. Operate the Shade by Remote Control: Select the group of the shade, press OPEN to move shade to fully open. Select the group of the shade, press CLOSE to move shade to fully closed. Select the group of the shade, press or to adjust shade location.
Press the programming button on motor inside of shade (next to the power cable) - - -Press P2 (on back of remote) – Pause for a second - - Press P2 - pause for a second - - Press up. Note: All of the steps listed below must be done in order and without stopping. IF at any point a wrong button is pushed you must start the process over.
2016年9月2日 · Paradigm Remote Control LEVEL CONTROL TOUCH SENSITIVE FEATURES: • Available in single channel & Fifteen Channel. • Touch sensitive buttons. • Levelling control (15 channel remote). • LCD display (15 Channel remote). • Hide unused channel function. • Slim Magnetic wall mount.
programming the motor and remote control and to fully understand the function of your motorized shade. Also, note that the batteries in the motor are fully charged at the factory prior to shipment. 1. .
See instructions on page 10 on assigning shades to channels. The program button on the shade’s headrail or motor end lets you move your shade without a remote. It’s also used to perform. various programming functions, discussed later in this manual. Pull out the paper strip on the back of the remote. Insert 2 AAA batteries.
Pair Remote to Blind or Shade Use the-and + buttons to select the channel to pair. Press and hold the programming button on the motor (about 2 seconds) until the motor jogs x 1 and/or beeps x 1. In the next 10 seconds, press and hold the stop button on the remote until the motor jogs x 2 and/or beeps x 3. NOTE: Repeat steps 1-3 to unpair remote ...
6 Channel Remote: press the channel selector until all six lights are lit to control up to 6 shades at the same time using the remote control as described above. 16 Channel Remote: press the channel selector button until “CC” appears in the display window to control up to 16 shades at the same time using the remote control as described ...
Should you need to program a remote for your motor operated solar shade, follow the steps below to insure success. Unplug your shade from its’ power source for at least five seconds. After waiting five seconds, plug your shade back into its’ power source. Press the recessed button on the back of the remote two times.
BALI MOTORIZED SHADES OWNER'S MANUAL Pdf Download
Shade Program Button QUICK START GUIDE The program button on the shade’s headrail or motor end lets you move your shade without a remote. It’s also used to perform various programming functions, discussed later in this manual. Getting Your Remote Ready For the Two-Button or Single-Channel Remote Pull out the paper strip on the...
- 某些结果已被删除