Flushing the tube may be done to keep it from getting clogged. Not all patients need their tube(s) flushed. It is often done when it is newly placed until the drainage is clear. Do not try to flush your nephrostomy tube unless instructed to by your doctor. The end of the catheter is placed in the renal pelvis of your kidney.

If you have a nephrostomy and have been taught to flush it to maintain flow, this film offers a refresher on how to do this at home. For this procedure you require: Someone who has been taught to perform this procedure; 0.9% sodium chloride; 10ml luer lock or luer tip syringe; sterile gauze; Alcohol-based hand rub; Blunt disposable clamps ...

2023年7月20日 · Placing a nephrostomy tube is often an outpatient procedure and you’re able to go home after (unless you’re already in the hospital getting treatment for another condition). Other names for a nephrostomy tube are nephrostomy catheter or percutaneous nephrostomy.

Insertion of a nephrostomy tube involves passing a needle, guidewire and then a pig-tail drain through the skin, subcutaneous tissue, muscle layers and the renal paren-chyma into the renal pelvis (McDougal et al, 2015).

Unscrew the blue cap on the stopcock valve that connects to your drainage tube. Take the white cap off the syringe and screw the syringe on to the stopcock. There is a lever on the stopcock. Turn the lever so that it points toward your drainage bag and away from your body.

2018年9月18日 · You typically need to flush your tubing at least once a day, but you may need to flush more often following your procedure. Your doctor will give you specific instructions on how to flush...

Flushing a nephrostomy tube via a three-way stopcock . A three-way stopcock . Step 1: Connect stopcock for flushing . A sterile three-way stopcock with cap in the off position . Turn the stopcock off to the syringe port

Nephrostomy tubes are inserted in the operating theatre or radiology department to provide temporary or permanent urinary drainage following a procedure, or to relieve ureteric obstruction. An interventional radiologist places and changes a nephrostomy tube under imaging guidance. Flushing of a nephrostomy tube is indicated if:

Flushing the drain will help keep the tube functioning properly. Turn the three-way stopcock off to the drainage bag. Clean the flushing port with alcohol and attach the flush syringe. Gently inject the flush. Turn the stopcock off to the flushing port and open to the bag.

Do not bathe in a tub, use a hot tub or swim as long as you have the catheter in place. transparent dressing, it is changed every 72 hours. Either type of dressing should be changed if it gets wet or the edges become loose. Gather your supplies. Wash your hands with soap and water for 15 seconds. Rinse and towel dry. Put on the non-sterile gloves.