2006年4月4日 · CEL : Code=P0328 Jump to Latest 64K views 38 replies 16 participants last post by spasmonaut Nov 21, 2011

2011年10月21日 · P0328/P0325 code. Knock sensor information. Jump to Latest 419K views 270 ...

2006年10月13日 · The only code left to clear is P0328 and the new sensor just showed up this morning so I have her warming up in the driveway now and I'm going to change it out before I head to work. For all interested, as some have noted, it has come and gone where the light disappears and then returns.

2012年12月4日 · It continues to run really rough and almost stall when motors warm .. So far I've replaced the plugs , wires , distributor, knock sensor , yet still have the problem .. I'm also noticing some black soot under the truck coming from the exhaust .. The codes were p0300 & p0328 . Which is misfire and knock sensor ..

2008年3月4日 · Hello all. I have a 2004 X XE 4X4 with 37,500mi on it. And just I just randomly hooked my Scan gauge up. Now there is no SES light on. but a P0328 Code is up. I check it out and found that it is a Knock Sensor code. There are no other codes coming up. My MPG is ok. Engine is running smooth. What...

2010年7月6日 · HELP! I started this project with a 10" 3/8 extension, a 12mm socket and 3/8 ratchet and some PB Blaster. The bolt came out without a hitch, but, I turned the socket upside down on when trying to remove it per the Chilton's manual image and accidentally pulled off the female (car side) plastic socket WITH the knock se

2014年2月28日 · P0328 P0328 - I was a little disappointed that the Knock Sensor code was a costly repair. What I found was this link for a relocation of the sensor: (video is for a 99 pathfinder, however the 3.3L engine is the same configuration as the '02 Xterra) Parts:

2017年8月25日 · C1109 - P0305 - P0328 codes Jump to Latest 3.9K views 9 replies 3 participants last post by Undrstm8ed Sep 6, 2017

2017年8月10日 · After I got the heads checked and put back together I finally got it running. It drove fine one the test drive, but as I was driving it to work the "check engine" light came on and I noticed that I could smell gas and it was a little rough on the idle. I got three codes, which are P0328 knock sensor high input, p0420 and p0442.

2020年5月14日 · The other week I got a P0328 code on my dash. Looked it up and found the knock sensor problem and decided that I would just replace the sensor since it was easy to do, inexpensive, and worthwhile. So I took off the old one, bolted on the new one and hooked it up, and disconnected the battery to reset the code.