2014年3月26日 · 1) Ran fine and just out of nowhere wouldn't start. Cranks fine but no attempt to start. 2) P1351 code (high voltage to ICM) 3) Replaced the original ICM and IC (17 years old …

Customer: I have a P1351 Code in a 1999 Tahoe with a 5.7 Vortec I talk to someone before I have replaced the cranksensor and the ICM and the coil cap and Rotor and the camsensor all …

P1351 code on a 1998 chevy express 3500 crank but no start. ... I have a 1997 chevy pick-up with a no ...

Customer: one morring it would not start so I found code P1351 it has 345000 miles but IT was running very good I have replaced the crankshaft sensoe , the ICM , Coil , Cam sensor spark …

1998 chevy 5.7 vortec throwing code p1351. Truck is hard to start when warm seems to start fine when Cold ...

The code you sent, P1351, is for the ignition coil control circuit in the ICM. You may have inadvertently set it when you changed out the ICM, but it has nothing to do with the fuel …

98 astro no start code P1351 and P1351pd. Ok, great! There is a test procedure to run that will test the circuit and also the VCM (vehicle control module).

2000 gmc jimmy code P1351 .hard to start ,when starts runs good but engine lite on? Super Mechanic 29 yrs. exp., ASE master, cert. in G.M. electrical, a/c, susspension, brakes, …

O.k. Next step here. Reconnect the injector connector with the ignition off.Then disconnect the ignition module wiring connector and take your multi meter and test from terminal B (white …

Customer: I have a 99 blazer with a P1351 code that cranks but will not start. there is power to coil and good fuel pressure. how do i fix? Answered by Auto Go in 8 mins 14 years ago Auto Go