2010年10月26日 · 05 C6 3.2 So heres my problem.. CEL came on.. P2006, P2007 came up. Alldata says "Intake Manifold Runner Stuck Closed bank 1 (P2006) and bank 2 (P2007)" It …

2009年11月12日 · P2006 - Intake Manifold Flap; Bank 1: Stuck Closed P2007 - Intake Manifold Flap; Bank 2: Stuck Closed I suspect that I either crushed the vacuum line or failed to properly …

2021年1月26日 · The P2006 code is a generic OBD2 diagnostic trouble code relating to the intake manifold runner control circuit. This code is similar to the P2005, P2007, P2008, P2009, …

2025年2月9日 · As stated above in the title, i've ran into the issue of having both codes P2006 and P2007 pop up with a solid check engine light. Not sure what exactly causes this issue but …

2013年12月27日 · P2006 + P2007 - Intake Runner Stuck Closed Originally Posted by Pcx. Please post a picture of said ...

2024年5月6日 · Hello all, I have a 2017 Q7 3.0T and DIY'd the thermostat/pump/PCV valve. Of course, I installed the manifolds back incorrectly and got the p2006/p2007 codes. I have since …

2019年10月5日 · P2006-7 is the flaps in the lower intake manifold (and if you are getting both faults at the same time it's the solenoid), which are BOTH controlled together by the one …

2016年4月18日 · I've been lurking over these forums for months regarding this problem. I'm hoping this thread can provide some consensus. I have a 2010 Audi S5 4.2L V8. In November …

2004年3月22日 · Codes p2006 and p2007 hit around 3,700 RPM indicating "Stuck Closed" on both (bank 1 and bank 2) intake manifold flaps. Engine went into limp mode and had to pull …

2023年10月24日 · P2006 + P2007 - Intake Flaps Stuck Closed - 3.0t; Results 1 to 2 of 2 Thread: P2006 + P2007 - Intake ...