The PLEM, or PLIM if the structure is located in-line the pipeline, is basically a simple subsea manifold at the end of a pipeline where the flow is split into branches and connected to the production or injection wells located on the subsea templates or manifold via …

The Oil States Pipeline End Manifold (PLEM) and Pipeline End Termination (PLET) systems are typically used in new construction where a pipeline terminates or needs to be jumpered to another location, such as an FPSO, refinery, holding tank, etc. …

The Pipeline End Manifold (PLEM - Figure 1 ) is an equipment employed in the subsea systems of oil and gas production. The main objective of the equipment is to split the production flow into multiple routes. In general, the production reaches the PLEM, and later

PLEM (Pipeline end manifold) and PLET (Pipeline end termination) are subsea structures to attach subsea pipelines and pipeline ends. These equipment will have numerous components to direct, control or isolate the flow, with other functions such as chemical injection, pig launching and more as required based on project needs.

2018年1月25日 · These flowlines/pipelines or conduits are connected via manifolds, pipeline end manifolds (PLEMs), and pipeline end terminations (PLETs) and form the part of the subsea production system (SPS). The manifold, PLEM, and PLET components that make up a SPS are described in this article.

1998年11月1日 · Assessing the PLEM design involves modeling the running sequence with simple static vector-analysis methods to predict behavior of the PLEM stepwise through the procedure.

PLEM. The Pipe Line End Manifold (PLEM) is a subsea structure acts as a connection point between the main or branch pipeline. The PLEM consist of WOM Dual Block Valves (ROV Operated), Gate Valves, Tees and hubs. PLEM has facilities for Multiphase Flowmeter, pig launching and/or receiving.

2018年1月25日 · The manifold, PLEM, and PLET components that make up a SPS are described in this article.

2012年8月8日 · A PLEM is a subsea structure used to connect rigid pipeline with other subsea structure such as a manifold or a tree, through a jumper. It is also called a pipeline end termination (PLET), especially to serve as a support for …

PLEM. Pipeline end manifold. Source: API RP 17A, Design and Operation of Subsea Production Systems—General Requirements and Recommendations, Fourth Edition, Reaffirmed 2011. Global Standards. Source: API RP 17B, Recommended Practice for Flexible Pipe, Fourth Edition, July 2008. Global Standards