2014年4月2日 · The much-anticipated Traxxas TRX-4 scale crawler is finally here, and it’s a good one. Traxxas clearly put lots of thought into the design and engineering of this all-new truck, and they have enhanced the platform since its initial release. …

2015年3月13日 · Tuning the Traxxas TRX4 GTS shocks does not have to be complicated. Unscrew the X-ring retainer cap, lube the X-rings with Green Slime, reinstall the cap to finger tight, loosen the cap 1/4 turn. Done! From there you can adjust the damping by using different weight shock oil. I run 10wt in the winter and 20wt in the summer.

2019年4月11日 · After having installed both the overdrive (12/33) and underdrive (10/35) gearing in the axles of my TRX4 Sport, I decided that both provided too much difference in the front to rear rotations of the wheels...especially when sidehilling. So...which end should be …

2012年5月23日 · The TRX4 is 32P. 12-13T pinions will be a fine starting point but you will need the 45T spur from the 2 speed versions since the smallest pinion that fits with the Sport's spur is 15T. The Tekin motor would be my choice by far.

2012年3月15日 · Yes 4WS TRX4 it can and has Been done and I am almost ready to build my 4WS TRX4 ill be posting the build thread very soon!!! very simply you need the front axle in the back and the Panhard mount and one less upper link its really not that difficult there is no drilling..

2022年12月21日 · Not a TRX4, but a TRX6 TRX6, +2speed +Lockers Mostly stock chassis with heavy body cosmetics (custom bed, bumpers, lights, metal roof rack etc) No definite weight but most likely over 10 lbs. HW AXE 2850Kv R2, 11/45 gearing + MKS HBL 550 + winch (mostly unused) + Light kit SMC 5200mah hardcase

2017年11月22日 · TRX4 has the original XL5 ESC with a HH Trailmaster 550 21t and running a HH shv500 v2 if that matters. This rig will be pulling IMO a lot of weight... Trailer is little over 4 lbs and with a 6+ lb Capra on board, that's approx 10 lbs for the TRX4 to pull.

2018年11月15日 · The 2262 BEC is simply a band-aid fix, sold by Traxxas, to compensate for the weak TRX4 1 amp XL-5 ESC in order to allow it to be used with the over priced 400 oz/in 2255 high torque servo at 6v. Once installed you have a marginal BEC, supporting a marginal ESC, in order to drive a marginal over priced servo.

2020年4月26日 · Since the trx4 also has a 12.8wb rtr option the rails are a bit longer than say the scx10 rails. The Cherokee body should fit pretty well with only minor trimming of the fenders if any. Some people use another front bumper mount …

2020年1月25日 · TRX4 compatible skid for use with Axial 3-gear transmission and Hurst dig by JamesInSpace . Reactions: ...