2007年1月3日 · Here are the plans to build a simple and effective fleshing beam: The picture of mine are a 6 foot long planed 2x6 bought from andwhere that sells lumber. You could aslo just use a log from a tree, 2x4, etc. Try to get a piece of wood as …

2021年3月24日 · Not hard to make a perfectly good fleshing beam. Made two at camp one year. In the spring I cut a nice straight 8 inch diameter,10 ft long white spruce,peeled it and cut it in half lengthways with the chainsaw,shaped the ends rough with the saw,then planed it smooth on the cut end.Also rasped off and planed a couple small knots on the surface.

2018年6月2日 · Hey guys I'm new to trapping and fur handling and I just bought a freedom brand hardwood fleshing beam that is 5x46 inches, I have just been leaning the beam against my leg to flesh and it's super uncomfortable. Any ideas and pictures on how to build a nice fleshing beam stand along with instructions on how to do it would be awesome.

2024年10月21日 · Seen them built into a wall stud before. I run threaded rod between a 2X4 on each side of the bottom of the beam then a cross board at each end for stability. A vertical 2x4 on a hinge screwed to the bottom of the beam allows it to fold up out of the way when not on use a couple pieces of scrap holds the bottom of the support 2X4 in place.

2021年2月28日 · I was able to get a 12 in piece of pvc 6 ft long. I'm not sure what dimension's to draw on it prior to cutting it. I want to cut it in half,diameter wise, and use one half for yotes and cats. The other half for beaver. I'll do coon on which ever side will work the best. I …

2010年6月2日 · There are a couple of line drawings for wooden beams in this link, with a wide assortment of different beam types - both made from wood and PVC pipe if you haven't seen this yet for your reference: Fleshing Beams In Review One only needs a few simple tools to construct an effective wooden beam - dimensioned lumber, a saw, wood plane and sandpaper.

2019年7月30日 · What size fleshing beam is the best all-around size for coyote, fox, bobcat and racoon. Re: ...

2022年12月29日 · Looking for the best all around fleshing beam. Would a 5or7" beam be sufficient for lets say coon, otter, beaver, and muskrat. Im a new trapper and just trying to figure out what the best system would be.

2019年10月21日 · I'm looking to build a portable fleshing beam stand to take to fur handling demos, events and backup fur sheds. I dont like the beam at 45* angles like some I've seen, I like it more horizontal to save from bending too much. …

2023年12月3日 · Use a 2X6 cut out in the shape of a large fox board with edges curved. This size and shaped beam will accommodate all pelts larger than mink, marten, muskrat, etc. which are easily fleshed on their own shaping boards using a small pelt (stirrup) fleshing tool. Also build it to fit your height angling up about 30 degrees to your solar plexus.