2012年12月14日 · Precision Plasma LLC sells DIY CNC plasma kits. Here is a model of a simple cnc rotary tubing cutter. This design uses a 6" 4 jaw chuck in which the tube moves under the torch. The complexity of the tubing cutter depends on the application.

2019年2月18日 · So you have the control side which tells the plasma cutter to turn on the torch, then you have the plasma cutter itself. Put a normally open push button switch in parallel with the relay output contacts that tell your plasma cutter to turn on the torch. Disable THC in Mach3 for testing. When the torch fires, immediately press and hold the button.

2022年12月30日 · Im thinking of building very budget cnc plasma for diy hobby stuff. Very valuable information in your post and as you reposted there is really a confusion about pilot arc etc. I have a budget plasma cutter i bet its HF because every cheap one is HF - I have upgraded it to have a Pilot Arc.

2016年10月20日 · I also have the Miller Spectrum 625, and would also like to use it for a CNC plasma cutter. Is the older Spectrum 625 O.K., or is there a big difference with the newer Spectrum X-Treme 625?

2021年3月2日 · The cnc controller and PC is located in the control cabinet which is located on the gantry. The Plasma unit is located beside the table aproxomatily 1m. The plasma hose runs in a cable chain distance of 150mm from other signaling cables. In this cable chain a usb and hdmi cable are also run to a standalone control console.

2014年5月6日 · I would like some feedback from anyone . . . This problem is driving me nuts. I have been cutting flanges from 3/8 steel with my torchmate cnc plasma with a powermax 900 plasma machine. i have checked my amperage and voltage settings as well as my speed. everything seems to be about par.

2007年11月8日 · Two different processes, two different requirements. It would would be easier to rig a plasma cutter as a TIG than vice versa. The plasma cuts above the metal (not touching) and the added voltage is needed to build the arc. Hypertherms cut at about 140VDC and TD's at 155 to 160. Reduce the voltage and you reduce the gap.

2018年1月19日 · I have a home built CNC plasma machine running a hypertherm 45 XP I haven't cut in pretty good but I'm having some trouble with my lead Ins And Lead outs delete out cuts no problem but it seems as if I don't have a lead in when I look at the piece after I cut. I'm running Mach 3 and sheetcam it has anybody had this problem before Similar Threads:

2017年10月20日 · Hello, I would like some guidance as to how to add on a plasma cutter to a CNC machine. A few questions: 1. What kind/brands of plasma cutter might be good options to look at? (I don't intend on cutting metal thicker than 1/2" 2.What substrate should I put on my table so that it is protected from the plasma torch? 3.

2015年10月23日 · Resently I was given a Koike plasma cutter, model MNM1500 5x10 table. It's a 2004 model and is in great shape.. I'm hoping to get it running again!! It appears that when it was hooked up the ground for the electronics was grounded along with the ground for the plasma machine it self? So it looks like I'll be shopping for drivers and such to ...