2021年6月21日 · To work with the high beam switch all you do is take the trigger for the relay from the high beam wire right at the headlight. Wire that to your relay along with a ground trigger and wire from battery with fuse.

2024年11月22日 · Here’s the idea I had for wiring the rock lights to the Auxbeam. If you want all the rock lights on at once then wire them up in parallel sans the relay and switch. Run the ground to the chassis, body, battery or Auxbeam ground terminal and the hot wire to the Auxbeam control box switch terminal you want to activate the lights.

2021年10月22日 · Actually a better way to do it would just be to run high beam tap to relay’s 86, 85 to ground, battery to 30, 87 to lights, and then put the switch on the 86 wire from the high beams. That way the switch sees very little load, it can light up at the proper time, and it still perfectly controls the function you want.

2019年10月21日 · The way i sync'd the running lights to the high beams was to locate the high beam control wire color under the dash via a Haynes schematic. My voltmeter made sure i had the correct wire when i enabled the high beams.

2011年5月10日 · The primary reason you want to use a relay is to keep the high-powered wiring (translation: the wiring which is most likely to catch on fire) out of the vehicle's interior.

2019年12月31日 · Check if your multifunction switch has the fog light part already. Put the headlights on low beam, and right at the very farthest tip of the multi switch pull out. Check for voltage at the harness tucked up in the front fender. The fogs only come on with lo beam. Flick to high and they turn off automatically.

2019年6月28日 · We show you step by step how to install and wire lights or other accessories into your Jeep Wrangler JL or Gladiator JT Aux Switches. These are an add-on package from Jeep that come with the "Trailer Tow and HD Electrical Group" package, which includes a 240 amp alternator and Auxiliary Switches.

2004年11月2日 · You could wire the 12V+ signal wire for the switch that activates that relay to the factory relay that turns off the fogs on high-beams. The other terminal is open and will show 12V+ when high-beams are activated.

2010年1月14日 · In broadest terms you hook the high current portion of the relay directly to the battery and tap the low current "trigger" portion to the high beam +12VDC lead. You would also put the driving switch on the trigger lead. This gives you the option of "high beam only" or "high beam + driving".

2007年7月30日 · I want to modify my wiring so that when I turn on my stock aux lights my regular headlights will stay on high beam anyone know how?