Driver Side of Housing Bed’s Bulkhead Driver Side Bed Rail Serial Number The serial number is 10 digits and starts with

pushing toward cab (1) and up (2) on driver and passenger side. Note: 5.5ft. - 2 blocks 6.5ft. - 3 blocks 8.2ft. - 2 blocks 07-21 & 22+ INSTALL - Center the housing (A) between the bed rails, and up against the bulkhead on driver and passenger side. 07-21 INSTALL ONLY - (1) Drill 1/2” hole through bulkhead as shown on driver and passenger side.

Roll-N-Lock Tonneau Covers & Accessories for Silverado and Sierra trucks.

The truck bed covers carries a limited warranty for three (3) years from the original date of purchase, subject to the terms below. WARRANTY IS NOT TRANSFERABLE The warranty is to the initial consumer purchasing the truck bed cover …

2022年7月21日 · The truck bed covers carries a limited warranty for three (3) years from the original date of purchase, subject to the terms below. WARRANTY IS NOT TRANSFERABLE The warranty is to the initial consumer purchasing the truck bed cover and it is not transferrable to a subsequent end user.

This limited warranty is extended by ROLL-N-LOCK Corporation, a Florida corporation, with its principal office at 915 S. Dixie Highway, E., Pompano Beach, Florida (“ROLL-N- LOCK”), to the original purchaser of a ROLL-N-LOCK® truck bed cover or cargo management device.

(800) 952-7655 • www.rollnlock.com Page 3 Step 1: Bedliner Modification Step 2: Install the Housing Note: If the truck is equipped with a plastic drop-in bedliner and/or a plastic tailgate protector, some alteration will be necessary. If no bedliner is …

The truck bed covers carries a limited warranty for three (3) years from the original date of purchase, subject to the terms below. WARRANTY IS NOT TRANSFERABLE The warranty is to the initial consumer purchasing the truck bed cover …

up against the bulkhead. Do not . fasten the Housing in place. Making sure to . leave the Pull Strap connected to the Shipping Stud, rotate the Lock Lever to the 10 o’clock position (Diagram 6). A. A. B. B. Lift the Lid on the Housing and lean it against the cab (Diagram 5). Place a rag between the Lid and cab to prevent scratches.

Author: svickery Created Date: 12/2/2015 4:04:36 PM