Feb 4, 2012 · I didn't see any step by steps for the O2 sensor install on a 97 GST so here is my version. I have photos as well but it seems I can't post them either. At least not more than three: One is a view showing the sensor from the top, one shows the bottom view and one shows everything out of the way and the shield loosened.

May 28, 2020 · As for the injectors, I run EVO's 510cc yellow top on my 2g which is a 2.3L with a big 16g, 92 pump gas. @18 psi, the injector duty is 85-90% range, 10 high AFR. All of options you mentioned above would work for your setup.

Oct 21, 2020 · In any case changing the sensor won't do much because a bad rear o2 sensor will function fairly equivalently to a good rear o2 sensor when no catalytic converter is present. If you are driving the car on the street my recommendation would be to install a cat.

Used to replace the knock sensor connector on your harness side on various Mitsubishis, as well as he EVO X neutral switch on top of the transmission. Used on 95-96 2G DSM cam angle connector and 95-99 headlight connector. This connector is on the starter very close to the heat which most of the time it needs replacement.

Cam angle sensor (97-99 2G/2003-2006 EVO/ E & I CAM) Used on late model 2G DSMs and in all EVOs 4-9. SKU: N/A Categories: (2G DSM) 95-99 Eclipse , (EVO 8-9) 2003-2006 Lancer Evolution Tags: 2gb , cas connector , pigtail

This harness will adapt a 1G CAS into a 97-99 DSM, perfect for 1G engine swaps. It connects at the CAS, and then plugs into the 2G crank sensor. Requires splicing 1 wire into the 2G cam sensor wiring.

Denso replacement rear oxygen sensor for 1995-1999 2G DSM (Eclipse and Talon turbo models. Fits both FWD and AWD. Includes the sensor and copper lube. Replacement for the OEM Mitsubishi sensor MD185335.

Sep 30, 2006 · I've seen the vfaq on how to remove the rear O2 sensor but I wasn't completely convinced by it. If the ECU is smart enough, it will eventually notice that the sensor voltage is constant and not fluctuating as it should. I happened to have all the required parts sitting around already (with the exception of a few LEDs) so it cost me almost nothing.

Jan 21, 2001 · hesitation, bad BAD gas mileage, sputtering, black smoke, nasty plugs, rich a/f are all pretty good signs of a nasty hosed O2 sensor. Why don't you check your O2 sensor - look in the manual - it should have voltage on the connector on the passenger side of the block. Its getting a sensor tomorrow weither its likes it or not.

May 24, 2003 · I am trying to diagnose my o2 sensor harness. I have a new factory o2 sensor, and I am getting both heater/o2 sensor circuit malfunction. What I am trying to figure out is how do I check for continuity for the o2 sensor. there are four wires for the o2 sensor. Wire - o2 sensor - harness #1 - white - blue/yellow #2 - black - green/black