2014年7月14日 · It turns out by putting 5v through the connector AD0 on the breakout board you can change the i2c address of the board from 0x68 to 0x69. This means by ether connecting …

2025年3月12日 · i make 3 files ino, cpp, h for ds 1307 and cant normally set and display day of month. #include "DS1307.h" // Создаем объект класса DS1307 DS1307 ...

2016年1月25日 · MPU 6050. Need to use two sensor. How give different address ? How change address 0x68 one ?

2020年11月3日 · Tried using I2C Scanner (ONE GREAT MIRACLE, after few days of leaving it, i was playing around then i checked the monitor, it said i2c founded on address 0x68, then after …

2016年5月6日 · Hey all. I am using the DS3231 RTC module for a real time clock. However, my code is not working. At present, I am trying to set the clock. Here is my code: #include "Wire.h" …

2016年5月8日 · I believe that is the address of the EEPROM on the module. If you are not seeing address 0x68 in the scanner you are indeed back to square one. The RTC is not being seen …

2025年1月12日 · I am having problems with uploading a sketch to a standalone Atmega328P with an Arduino Nano as a USB to TTL adapter (I disconnected the Atmega from the Nano …

2019年6月11日 · Bonsoir, J'ai reçu ce midi (enfin) mon gyro, acceleromètre, magnétomètre donc je me suis empressé de le tester. Voici mon matos: MPU9250 Arduino nano Branchements: …

2018年9月24日 · Hello, i am learning how to use I2C, speccially with ds3231 for starting, there are a lot of libraries to make ds3231 work but i want to learn from scratch, i´ve been readiing some …

2015年4月6日 · I need to change the address since the data logger has a real time clock with a default address of 0x68. Thanks CrossRoads April 6, 2015, 3:40pm