2017年12月29日 · If you’ve already changed your Admin Tool ID and password, log in with your information. Pro tip: This username and password aren’t the same as your WiFi name and password. If you haven’t changed the username and password, log in with: Username: admin Password: password (case sensitive)

2020年1月30日 · Hello, I cant seem to find my login on the "10.0.0.1" admin tool page. I have factory reset the router, making sure the LEDs turned off and tried the default "admin" for username and "password" password, but it didn't seem to work. I repeated this a couple more times but still, no luck. If anyone could help me that would be fantastic!

2023年7月18日 · How do you reset the password for the admin profile for 10.0.0.1? I did the 30 second hold reset button and the two minute hole reset button but all it did was reset my Wi-Fi name and password.

2021年7月6日 · To reset the 10.0.0.1 password you will need to do a full reset on your modem. You will need to have something like a pen or paper clip to stick in the small reset hole on the back of the modem. You will want to hold the button for about 30 seconds to do the full reset.

2022年3月8日 · So to access the xfinity gateway administrator login page you need to go into a browser type in 10.x.x.1 (x can be replaced with whatever number was set as the ip) and normally a login screen to the modems admin settings SHOULD appear. For thr past week, however, i have been unable to access the login page. It just times out.

2018年10月1日 · Under my current network setup, I am unable to access my modem setup pages. My Default Gateway is 10.0.0.1, which is the IP address of my Orbi. If I attempt to access the last known modem IP address of 192.168.1.1, I get a time out (Firefox) or a page not found (Edge). So, the modem is in transparent bridge mode, and the Orbi is in Router mode.

2021年5月11日 · 10.0.0.1 login help I used to be able to login with the 10.0.0.1 login and now I'm internet essentials but still use the same gateway would you be able to help me log back in using the 10.0.0.1 admin tool

During the set-up, the router originally provided the "192.168.x.x" IP Address range. However, before the set-up was complete a Netgear pop-up message appeared informing me that due to an IP Address conflict with my ISP, "Netgear" was changing my IPadd to 10.0.0.1. There was no mention of speed or any other issues.

2021年2月13日 · I have already tried a factory reset on my router and I still cannot connect to 10.0.0.1 The other IP address you guys use, I think for businesses, also did not work. The connection just times out....

2024年1月21日 · Solved: About a week ago, I found that the admin panel for this MESH system had changed from the original 192 address to 10.0.0.1 (on its own). Is × Attn: Nighthawk Pro Gaming members, we have recently released firmware to address a critical security vulnerability.