2022年11月26日 · I had a T2 on a UT FAST mount for a few years but my 11.5” CQB upper now sports an NX8 with a piggybacked T2. Attached File Posted: 11/27/2022 3:04:47 PM EDT

2008年11月9日 · I’ve had an 11.5 sbr for years. It has a 12.5” barrel cut down to 11.5 so that it would have a slightly smaller gas port size. For the longest time, I didn’t think it was capable of …

2013年7月13日 · The 10.5" and 11.5" were both stainless Noveske barrels. All three were tested with the same PST 2.5-10X32. All three were wearing Geiselle SD-E triggers. All three had …

2017年2月27日 · Also not an SBR but 11.5" with 12" Seekins hand guard. 20170207_144220_001. View Quote.

2019年2月22日 · To be honest I have tried the VLTOR A5 system in both a 16 inch upper and a 11.5 inch upper that would limp brass out the ejection port when suppressed. the Spikes …

2020年11月30日 · OP, I have an 11.5 Hammer Forged BCM barreled upper. I run a Black River Tactical threaded insert at .067 and use a blue Sprinco carbine spring and H2 buffer. …

2020年1月20日 · Just make sure you have or buy a lower that you like, then submit the Form 1 for the 11.5” upper. Or get a pistol lower/complete 11.5” gun and submit that way. I have 5 SBRs …

2024年3月10日 · And based on various endorsements I decided to replace it with an 11.5" Barrel. At least with PSA, they use the A2 configuration, so the extra inch is HBAR thick steel, and I …

2009年5月13日 · My 11.5" barreled carbines are about 27.5" long with the CTR stock collapsed and using an A2 birdcage hider. One inch of 27.5 inches is represents 3.6% of the weapon's …

2020年10月8日 · Realistically, the terminal effectiveness of an 11.5" 5.56 is going to become quite poor before 500 yards. You can push it out to about 420 yards with BH 77 gr TMK, but most …