The 1747-UIC allows you to connect devices that communicate using DH-485 protocol directly to a computer’s USB port, using either the 1747-UIC’s RS-232 or RS-485 port and user-provided programming cables. Three LED indicators on the 1747-UIC provide communication status.

Find questions and answers from Rockwell Automation technical experts for this product in our Knowledgebase.

Before you can connect the SoftLogix system to the ControlNet network, you must create the 1784-PCIC or 1784-PCICS card as part of the SoftLogix chassis. In the SoftLogix chassis monitor, create a New Module.

The 1784-U2DHP USB-to-Data Highway Plus Cable lets you connect a computer to a Data Highway Plus (DH+) network via an unused USB port on the computer. You can also use the cable to connect the computer to PLC-5 processors (except for Classic PLC-5 processors, such as PLC-5/10, PLC-5/12, PLC-5/15, and PLC-5/25) or SLC 5/04 processors.

Find a sales and technology partnerGo to Partner Finder

2021年7月12日 · PCMK does DH+ and DH485. You want the 1784-U2DHP for DH+, and the 1747-UIC for DH485. To the best of my knowledge, DH485 ONLY runs at 19.2k. The PCMK supports PLC2 front port communications and Data Highway Plus in addition to DH485 with the right cables. The UIC is DH485 only.

2008年6月12日 · I have a 1784-U2DHP adaptor and have been trying to test it using linx. It lights the pwr led and the other 2 flash on when plugged in. Is there a...

Top 10 Most Popular Answers Using the 1747-UIC Adapter with a 64-Bit Windows Operating System Recommended Security Guidelines from Rockwell Automation Cable / Processor Pinouts 1784-PKTX, 1784-U2DHP & 1784-PCIC Drivers for 32 and 64 bit Windows 7 or Higher ControlLogix Remote I/O Module (1756-RIO) FAQs Rockwell Software Security Guidelines

2013年7月24日 · The U2DHP is a replacement for both the PCMK and PM05 / 06 cables (1784-PCMK, PCMC, PCM5, PCM6) as well as for the many iterations of the KT card (1784-KT, KTX, PKTX, PKTXD) when used in programming stations or PC’s.

2025年2月4日 · The UIC is definitely not necessary for the HMI as it is not a DH485 panel, a straight cable such as the NC13 should be correct. The channel 1 (mini-DIN) connector on the PLC is for DH+, unless you have a 1784-U2DHP or equivalent you won't be connecting to that.