2 天之前 · The Toyota 1AZ-FE features a lightweight aluminum block with thin cast-iron cylinder liners and aluminum head with two camshafts (DOHC) and four valves per cylinder (two intakes and two exhaust). The 1AZ-FE engine has VVT-i (Variable Valve Timing with intelligence) for intake side, Sequential MPFI fuel injection system, Toyota DIS “Direct ...

remove the 10 cylinder head bolts, in several passes, in the sequence shown. Remove the 10 cylinder head bolts and plate washers. NOTICE: Be careful not to drop washers into the cylinder head. Head warpage or cracking could result from remov-ing bolts in and incorrect order. 35. REMOVE CYLINDER HEAD GASKET 36.

professional universal thread repair system for metric and american screw threads, specializing in head bolt threads in aluminum engine blocks 717-880-1888

On the 1AZ the cylinder head torque is 58 foot-pounds. Then you put a paint Mark at the 12 o'clock position on the cylinder head bolt. Then use twist torque each cylinder head bolt by 90°.

brand new toyota original complete set of 10 pcs cylinder head bolts. car make: toyota. model/series: toyota rav4, avensis, camry, harrier & aurion

bolts in the sequence shown in the illustration. Torque: Bearing cap No. 2 30 N m (301 kgf cm, 22 ft lbf) Bearing cap No. 3 9.0 N m (92 kgf cm, 80 in. lbf) (d) Fix the camshaft with a spanner and so on, then tighten the camshaft timing gear set bolt. Torque: 54 N m (551 kgf cm, 40 ft lbf) NOTICE: Be careful not to damage the valve lifter.

2013年3月27日 · I'm doing headgasket on my buddies 325 and not sure where to get the head bolts torque specs for all the bolts including the aluminum ones. Also for the cam shaft tray and caps and the sprocket bolts.

Secure special tool 11 8 090 with belt tensioner bolt (2) to timing case cover. Tightening torque 11 28 1AZ. NOTE: A 3/4 inch tool is needed to release the central bolt.

TOYOTA (FAW) 1AZ-FE. Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.

(d) Remove the fringe bolt of camshaft timing gear. NOTICE: Be sure not to remove the other 4 bolts. If reusing the camshaft timing gear, release the straight pin lock first, and then install the gear. 13. INSTALL CAMSHAFT TIMING GEAR OR SPROCKET (LEADED GASOLINE) Torque: 54 N m (551 kgf cm, 40 ft lbf) 14. INSTALL CAMSHAFT TIMING GEAR ASSY