2021年6月28日 · The 1UZ ECU wiring harness is trimmed, bound and fits well in the firewall cavity - just a small bunch (20) wires to be connected to get everything working. The original E36 throttle cable looks like it can be reworked to fit. Its about 1 metre long and cuts down easily to bolt straight into the 1UZ cable bracket.

This Cybul mounts kit makes it easy to install a Toyota 1UZ-FE engine in a BMW E36. Totally bolt-on, it is designed to work perfectly with the Cybul swap special rear oil pan (sold separately) and doesn't require any modifications to the engine bay.

2021年7月4日 · The X20 plug has almost everything you'll need to interface with the 1UZ to the E36 - Ignition on, starter, tach, oil pressure, coolant temp, alternator charge, MIL, fuel pump etc. Just find the correct wiring diagram for your engine and your car then start mapping it out.

2014年6月10日 · Here is a rare opportunity to have all the hard work taken out of an E36 Lexus V8 conversion with this ready to go kit. Included is the following parts only! 1x Hydraulink power steering line, 1UZ to E36 rack. 1x E36 subframe with custom engine mount setup and nolathane dampers. 2x Engine brackets to suit 1UZ (would suit all year of engines)

2013年2月11日 · These headers run to a dual 2.25 system I made up with some old RS4 exhaust sections and magnaflow mid mufflers and cats. To accomidate this I had my panel shop cut out the original tire well and weld in a new flat rear floor & reseal it - …

BMW E36, 1UZ-FE engine mounts. These engine mounts are designed to work with our rear oil pan, available in our shop. They provide a 100% bolt-on solution, requiring no modifications to the bodyshell.

This Cybul rear oil pan kit was designed to make swapping Toyota 1UZ-FE V8 engine (Lexus LS 400, SC 400, GS 400...) into BMW E36 and E46 as easy as possible. The pan has a larger capacity than stock to ensure that there is always enough oil in the suction strainer to guarantee optimum oil pressure.

2019年9月23日 · This BMW E36 was built to drift by Alek at Alek Projekt in Poland. The car was previously powered by a turbocharged BMW inline-six making 700 horsepower. The engine featured a M50B25 block, M52B28 crank, ported M52 head, N54B30 pistons, M50 valves, custom-grind camshafts, and BorgWarner S300SX turbocharger.

2016年4月22日 · This BMW E36 was built for Dan Racing in Denmark by FUBAR Racing. Under the hood sits a turbocharged 4.0 L 1UZ-FE V8 which makes 479 horsepower at 5,200 rpm and 527 lb-ft (715 Nm) of torque at 3,800 rpm on 11.6 psi (0.8 bar) of boost.

The 1UZ-FE rear oil pan was designed to make swapping 1UZ engine into E36 and E46 as easy as possible. Supplemented by our engine mounts it makes a nice swap kit for E36. Pan has extra capacity to prevent strainer from sucking in air. Improved baffling and oil control. Laser-cut, CNC bent and beautifully welded.