2020年5月28日 · I've been sitting on this for a fair while now so better post about it so people know I am still having fun. This is a 20mm EDF unit using a 0703 outrunner and clipped 4 …

2020年12月10日 · The model has an 7.5" span, 28 gram AUW with the 180mah 2S lipo, motor puts out around 26g thrust, two linear servos for the elevons, a Sunrise high frequency switching ESC, and a 6 channel 2.4ghz receiver. All balsa for the construction.

2016年4月13日 · Shaving off 10 grams of battery and motor weight makes a lot of difference on these small models. Could make them better indoor candidates. I'm really not sure what I …

Here is my build log for the DH 108 Swallow from Steve Bage's jetex plans that I am modifying into an R/C 20mm EDF fan set up. I did start this a long time...

NitroCharged 20mm EDF: • 20mm EDF Pocket Rocket! DH108 Swallow...

2021年7月30日 · Maiden flight: • Micro RC Jet - 20mm Brushess EDF Maiden Go check out NitroCharged for other awesome micro EDF projects: / nitrocharged Audio courtesy of Big Blues Bed by Audionautix is...

2021年7月30日 · 15" wingspan, all balsa, two 1.5 gram linear servos, banggood RX, 20mm brushless EDF courtesy of Nitrocharged, Sunrise ESC. Will run 2s first just to make sure she actually works, then may tempt fate by trying 3s (or maybe not...we'll see).

The DH108 Swallow - 15.5" wingspan - allows the fan to just fit into the tail area. This is a design by Steve Page over at jetex.org, intended for a jetex motor. The first half of the fuse showing a half case of the fan unit which I printed up as a guide to make sure it all lines up nicely.

2020年4月2日 · It flew...very briefly! lol • 20mm EDF micro jet - going splat for ... fitting the wings, modifying the EDF shroud and installing it, little odds and ends, and getting ready for the...

2023年10月24日 · 13" span with the sweep and generous wing area is about what I've found to be ideal size for the 20mm EDFs I've built. Should be a near equivalent for 14-14.5" span …