2012年1月2日 · The real performance differences are quite a bit larger than the specs indicate - the 2153 will cut with saws that are rated at 3.8 hp, just like the NE346xp. The red versions are a tad heavier than the orange ones for obvious reasons, but I doubt you will notise it.

2011年1月27日 · There has been a lot of info given on 50cc saws, especially the MS261, 346XP, & 5105. No mention of the 2153!?! Is the 2153 the same saw as the 346XP except for color? Are either or both considered strato saws? Has the 2153 been ignored because of difficulty in finding J'red dealers? Saw Troll...

2010年4月7日 · If it does, buy the 2153 because it's cheaper. If you don't cut that often and want to save cash, buy a husky 445 or 450. Jonsered has the equivalent 2145/2150. The 2152 comes standard with a etech muffler and won't cut near as fast as …

2011年12月31日 · The 2153 took alot of parts and work to get it running great. The muffler was changed, coil replaced. The carb was replaced with a Walbro 199HDA, primmer bulb eliminated Top cover changed Changed to a 3/8's pitch chain and bar. Woodsported by ECsaws. To me I can cut 80% of my firewood logs with this saw and a 16" bar and chain.

2010年8月20日 · The 2152 and 2153 are the jonsered equivalents of the 353 and 346, respectively. The 353 has the same quality pro style construction but not quite the same peak performance as a 346--the same holds true for the jred models. Remember that they are essentially the same except for the plastics and the angle of the handlebar.

2009年11月28日 · im in the market for another jonsered. i know the questions already been asked & i know most of you guys are gonna say 2153 (346xp). lol. my line of work calls for a small saw every now and then. i owned 2150s in the past and loved them and one 346 oe and didnt like it at all. the 2152 is...

2021年10月19日 · I have a 2153 that has a strange issue. Idles and starts fine, revs fine but cuts out before getting to full rpm. Almost like a rev limiter but much too low. Checked the basics, spark plug, air filter, all that. Any ideas?

2010年5月27日 · 2153=346xpNE 2156=357xp 2159=359 2165=365SP 2171=372xp 2186=385xp 2188=390XP 2139=338XPT 2135=334T 2238 ...

2019年5月13日 · A 2153/346XP cylinder is a direct bolt on swap, with a nice pick-up in power, and if yours has the cat muffler, ditch it for the standard muffler. The 2152, 2153, 353, 346xp all share the same crankcase, crank, bearings, etc, so you won't have an inferior saw to the 346xp.

2010年1月3日 · I agree on skipping the 2152, and going for the 2153 (I have the Husky versions of both). The power difference feels larger than the specs tell you. They both have a bracket to keep the muffler safly in place.