2020年8月28日 · Remington brass is tough in 25-06 and will last, weight sorting it vastly tightened my groups. In one bag of 50 I ended up with about 6 different weight groups when I sorted by 1 grain variance lots. One thing I found in common with these three different 10 twist factory models of 25-06 is that 80 & 85 grain bullets shot tighter groups than ...

2011年6月28日 · Good quality Brass for 25-06 was in short supply when I had my 25-06 AI Built. I just bought some Sako 117 grain Factory Ammo and it formed perfectly. The Brass is good too. I now have 100 Nosler for when I re barrel in standard 25-06. …

2022年1月26日 · I had 5 25-06 rifles, down to 3 now, have lots of older white box (100 count) Winchester brass, I think 300 pieces of Winchester Blue/white bags and probably 500 pieces of Remington from about 15 years ago.

2024年10月25日 · It is impossible to find new 25-06 brass so I started to experiment with 30-06 and 270 brass. 30-06 is the parent cartridge for both cases. Using my 25-06 bushing die I was able to neck both sizes down to 25 cal with no problem. The issue is that after sizing the necks are too long for the...

2005年12月28日 · I would be inclined to believe you may have to turn your case necks if going from .30-06 all the way to .25-06. I would use Winchester brass and sort, I think you'll find the overwhelming majority of the cases tolerable after some prep work. And you may feel a little better saving $20 per 100.

2004年11月16日 · I have a 25-06AI on order and would prefer to use Lapua brass for obvious reasons. I have brushed upon forming brass and there seems to be some conflicting information concerning forming the 25-06 from 30-06 brass. Some suggest running the 30-06 brass through a 270FL size die while others...

2016年2月11日 · I just bought a 30-06 and had about 50 pieces of 25-06 brass laying around. I tried a few dummy rounds with it and it sizes ok but is 2.470 to 2.475 under sammi specs. Has anyone here used 25-06 necked up. I've googled everything and can only find necking 30-06 down. Don't want to damage new rifle.

2016年8月24日 · Yes, go .25-06 AI 40º...But I recommend a fluted stainless 26" Rem Varmint/Sendero contour barrel. The AI version is worth the effort, and worth the price of a set of dies. The brass growth is minimal, brass longevity is good, the velocity boost is nice, and fire-forming is simple when using .270 Win brass, and Nosler or Lapua .270 Win brass ...

2009年11月13日 · Mostly I shoot R-P .30-06 brass I've picked up at the range and resized to .25-06 (always have to length trim after resizing). I've also used Federal and Winchester brass. My Ruger is at best a 1.5 M.O.A. rifle, so brand of brass, weight sorting, or neck turning doesn't really make any difference.

2025年1月22日 · Forming 6mm Lee Navy Brass from .25-06 I am interested in forming 6mm Lee Navy Brass and know that using .30-40 as the parent case is not recommended. I have tried using .220 swift brass and this works but the neck is so short there's barely any neck tension on the very long 115gr bullets that I'm using.