2025年2月4日 · You have far more choice than I do, but when Win 780 Supreme was announced it was being discontinued, I grabbed all the 4kg jugs I could and have a lifetime supply, it is perfect in the 264WM with either the 130g Accubond or 140g Accubond.

2016年8月24日 · Cartridge : .264 Win. Mag. Bullet : .264, 140, Hornady A-MAX 26332 Useable Case Capaci: 77.269 grain H2O = 5.017 cm³ Cartridge O.A.L. L6: 3.500 inch = 88.90 mm Barrel Length : 26.0 inch = 660.4 mm Predicted Data for Indicated Charges of the Following Powders. Matching Maximum Pressure: 62000 psi, or 427 MPa

2017年7月25日 · My 264 win mag is runnin 3230fps with 140 grain bergers, retumbo powder, and 26" proof barrel. I could push it faster but accuracy is in the .2's so no need to. Also brass is cheaper, if for some reason you cant find .264 brass just buy 7mm mag brass and neck it …

2011年5月4日 · The 264 has a slightly smaller bore and in theroy would have a bit more barrel wear but on the other hand the 270 wby is loaded to greater pressures and that would more then make up the differnce. Ill put it this way.

2019年12月7日 · I am getting ready to begin load development on a 264 win mag. It has 26 inch hart barrel, 8 twist. I am looking to load the Hornady 140 ELDM, H1000 and a CCI 250. I have seen the data put out by Hornady but would love to see any loads you all have found to be successful. I wouldn't mind seeing some H1000 and 140 vld data as well.

2006年12月1日 · The 264 win mag seems to have this in its description. Have better barrels and throating styles in modern rifles removed this "scarlet letter" for this cartidge and others in this category or is there some recommendations on velocity/bullet weights which extend the …

2014年4月27日 · Just not in 264 caliber. I have reamers and rifles built for it necked up in 277/26-Nosler now being called 27-Nosler, 284/26-Nosler now 28-Nosler, 308/26-Nosler aka 30-Nosler and 338/26-Nosler. The powder to bore ratio, over bore ratio is higher than a 7mm RUM.

2015年1月5日 · What are your thoughts on a 1:9 twist x 26" barrel spinning a 142 gr Accubond LR fast enough? Nosler recommends 1:8 twist for the ABLR but their load data test barrel is 24" x 1:9. Is the 0.082" longer than 140 Accubond going to be significant? Fyi; I get 2 different ABLR SG's from Berger...

2003年6月4日 · I am a big 6.5 fan and actually own both a 26 nosler and 264 win. Here's my loads that I settled on and experience with the same components (26" barrel, nosler brass, federal 215m primers, retumbo powder): 264: - 140gr berger elite hunters, 72.0gr of Retumbo, 3,217 fps - shoots consistently in the .3's

2020年4月19日 · My new 264 is running 3214 with 140s loaded to 3.460" in a model 700 rebarrel... 26" stainless barrel-CCI 250 and H50BMG (100% fill, but not compressed) Win 7 mag brass necked down and prepped 1.5" verticle at 525 yards on multiple days.