2020年11月28日 · Thought so. Most consumer DACs with RCA outputs will put out up to 2 Volts RMS (Dont ask me what that means technically). Most DACs with XLR outputs (or balanced) will put out 4 VRMS.

2019年3月15日 · Also, what happens when you use a 2Vrms DAC output with an amp with an input sensitivty of say 1.5Vrms? Does the amp simply reach its rated max output at a lower volume control level, and then clip after that (whereas it wouldn’t clip if fed 1.5Vrms)?

2024年8月7日 · Does 2vrms unbalanced and 4vrms balanced matters? Would there be any performance differences between these two cables in terms of volume, noise floor and etc.? Or there wouldn't even be any changes compared to my cheap cable and should I …

2021年4月25日 · Standalone DACs with no volume knobs usually have a fixed output when you set their volumes to max in Windows. Which is usually around 2Vrms ? For example, To use Atom DAC+ and SMSL SU-1 DACs you have to set their volumes to max in Windows and then they both output around ~2Vrms ?

2024年8月7日 · 2vrms Unbalanced vs 4vrms Balanced into Active Speakers Hello everyone, so I tried to figure it out myself but couldn't, so here I am. My question is I have a pair of Kali LP-6 V1s and Moondrop Dawn Pro DAC, speakers are located on my 1.5 meters wide desk.

2019年6月2日 · I want output to be 2Vrms only because its standard RCA output from DAC. Click to expand... The amplifier behind it really does not care if it is 1V, 2V or 4V for that matter.

2024年11月24日 · JCAlly JM10 Pro - CS43131, 2Vrms JCAlly JM11 - SPV4040, 10.5mW@32Ohm JCAlly JM12 - KT02H20, 1Vrms //FiiO JA11 firmware compatible JCAlly JM20 Pro - CS43131, 2Vrms JCAlly JM25 - ES9318C (SA9312L), 35.15mW@16Ohm 1.2mW@600Ohm JCAlly JM30 - CS43131 (SL9123L), 2Vrms, 31.25mW@32Ohm …

2020年2月21日 · High gain gives you 0-2Vrms. Engaging high gain will automatically reduce the volume by 6dB so as to not blow your ears out. Volume (and voltage) will stay the same, but you will now have the ability to raise the volume even further, to 2Vrms.

2022年7月28日 · Is 2Vrms enough to achieve the maximum SPL when using the -10dBV input of JBL 305p MKii? +6dBV = 1.995Vrms?

2020年6月5日 · Hifiberry DAC+ Pro XLR provides 4VRMS output, if you want to build a Pi-based streamer. 2VRMS is the Redbook standard for single-ended line output, and a lot of devices don’t even manage that.