
Chrysler - Dodge - Jeep 3.8 liter V6 engines | Allpar Forums
2020年11月16日 · Chrysler - Dodge - Jeep 3.8 liter V6 engines The 3.8 liter V6 was a conservatively designed, wider-bore, longer-stroke version of the then-new 3.3-liter V6. It was a good, solid engine from the start - not the highest performer or the lowest, but relatively quiet, driveable, and reliable.
3,8L V6 mods - Allpar Forums
2020年4月17日 · it has a 3,8L that I had in one of my caravan in 96 , I was satisfied at the time , but I'm a bit aware that a 3,8L in a Jeep might not be the best engine .... I'm aware that with the 4:10 ratios it might help ! BUt since I have modified about every engine that I had in my hands ( my 4,0L has 235 hp ) and my RV 460 ( 7,5L ) has 420 hp ,,,,
reliability of 3.8L V6 - Ford Forums
2004年2月1日 · Found a very nice 1993 Thunderbird SVO at a local used car delear. It has a 3.8L V6 engine (not sure if it is SC or not). I reseached this engine and found out this engine had a history of blowing head gaskets. Is this engine dependable or a nightmare? Any information/advice would be very...
3.2, 3.5, and 3.8 Liter V6 Mopar... - Allpar Forums
2020年11月16日 · The 3.5 litre V6 engine was, at the same time, modified and switched to an aluminum block, to produce between 242 and 253 hp; a re-engineered 3.8 liter engine, related to both, was released later. These engines could be shipped with a variable intake system, building on Chrysler's work back in the 1950s and 60s (to be fair, other automakers ...
3.3 V6 - any problems? - Allpar Forums
2012年11月17日 · The 3.3L/3.8L engines are very reliable - they are basically the same block - just different stroke. I had a 3.8L in a 2000 T&C Ltd that we purchased in 2003 w/78K miles and traded in 2008 with 161K miles. Only one real engine issue. The most annoying one was the serpentine belt slipping off.
3.3L vs 3.8L ? Pros & Cons - Allpar Forums
2013年5月16日 · We had a 2001 Dodge with the 3.3 and we now have a 2007 Town and Country with the 3.8. The 2001 was a lot lighter. Same body style, but no Stow and Go. We got better in town mileage with the 2001. MPG is about the same on the highway. The 3.8 is better on the highway. The 3.8 is geared higher, so the engine turns slower at highway speeds. That ...
Chrysler, Dodge, and Plymouth 3.3 Liter V-6 Engines
2020年11月16日 · The 3.3 liter engine was fitted out for compressed natural gas when used in minivans, starting in 1994. Five million (5,076,603) engines later, the last 3.3 was made at Trenton North (Michigan) on November 8, 2010; by then, it was only used in minivans. The 3.8 liter variant lasted until May 2011.
The Neglected 3.9 V6 Dodge Truck Engine - Allpar Forums
2020年11月16日 · The 3.9 in use In 1987, its first year, the 3.9 used Holley 6280 two-barrel feedback carburetors. This setup may have lasted into 1988 on Dakotas, but then Dodge slapped an EFI intake and induction on the 318 and the 3.9. They shared a Holley throttle body, until the Magnum versions, and used a non-vacuum advance distributor.
EGR valve replacement guide - 3.3 and 3.8 V6 engine (minivans)
2020年11月16日 · EGR valve replacement guide - 3.3 and 3.8 V6 engine (minivans) by Zach Isaacson • Also see our main minivan repairs page! Here is a how-to guide to removing and replacing the EGR valve. The vehicle is a 2004 Grand Caravan with 3.3L engine. [Editor's note: it probably applies to any vehicle...
2011+ VM Motori 3.0-liter V6 Diesel Engines Used by Chrysler
2020年11月16日 · Fuel economy for the 3.0-liter diesel engine (as used in the Grand Cherokee) is 8.3 L/100km on the combined cycle, an improvement of 17% over the prior diesel. CO2 emissions (combined cycle) are 17% lower, at 218 g/km, partly a result of new 2000 bar injectors (Chrysler Europe claimed 1800 bar pressure, but this is likely on the lower power ...