3003 aluminium alloy is an alloy in the wrought aluminium-manganese family (3000 or 3xxx series). It can be cold worked (but not, unlike some other types of aluminium alloys, heat-treated) to produce tempers with a higher strength but a lower ductility.

3003为AL-Mn系合金，是应用最广的一种 防锈铝，这种合金的强度不高（稍高于工业纯铝），不能热处理强化，故采用冷加工方法来提高它的力学性能：在 退火状态 有很高的塑性，在半 冷作硬化 时塑性尚好，冷作硬化时塑性低，耐腐蚀好， 焊接性 良好，可切削 ...

Aluminum Alloy 3003 is a widely used medium strength aluminum alloy with manganese as its primary alloying element. It has good formability, and may be suitable for applications that …

Alloy 3003 is a non-heat-treatable 1.2% manganese, 0.12% copper alloy commonly available in flat rolled coil, sheet and plate from a wide range of producing mills. It is one of the most commonly used of all aluminium alloys, essentially commercially pure aluminium with the addition of manganese to increase its strength about 20%.

2024年5月27日 · 3003 aluminium is one of the general-purpose alloys that originates from the processed aluminium-manganese family. This type of alloy cannot be heat-treated but allows cold treating. However, when cold-treated, the product is of lower ductility. Some of the properties that define 3003 aluminium are derived from manganese (1.25%) and copper (0.1%).

What is 3003 Aluminum? 3003 aluminum is a non-heat-treatable alloy primarily composed of aluminum (approximately 97.5%) with manganese (1.0% to 1.5%) as its main alloying element. This composition enhances its strength and workability, making it …

Aluminum / Aluminium 3003 alloy has moderate strength and good corrosion resistance. The strength of this alloy can be increased by cold working. The following datasheet gives an overview of Aluminum / Aluminium 3003 alloy. The following table shows the chemical composition of Aluminum / Aluminium 3003 alloy.

Aluminum Alloy 3003 is a commercially pure aluminum with the addition of manganese. Alloy 3003 is the most widely used aluminum alloy due to it's excellent characteristics. The addition of manganese increases the strength and Alloy 3003 is 20% stronger than alloy 1100 .

3003 Aluminium is an alloy primarily composed of aluminium with manganese as its main alloying element, which gives it higher strength compared to the 1100 series. Known for its excellent corrosion resistance and workability, 3003 Aluminium is commonly used in applications requiring moderate strength and excellent formability.

2012年3月1日 · 3003为AL-Mn系铝合金，是应用最广的一种防锈铝合金，这种铝合金的强度不高（稍高于工业纯铝），不能热处理强化，故采用冷加工方法来提高它的力学性能：在退火状态有很高的塑性，在半冷作硬化时塑性尚好，冷作硬化时塑性低，耐腐蚀好，焊接性良好，可 ...