3M™ Motor Lead Pigtail Splicing Kits 5300 Series are designed for splicing motor lead cables to incoming feeder cables, including the accommodation of pigtail (stub) connections at 1000 volts and less.

For two-hole lug connections, use 3M ... 5302, 5303, 5304 78-8126-5500-5-C Technical Information: For use on Non-Shielded Cables 1000 Volts (or less) with one-hole lugs. Cable Size Range: Feeder: 2 AWG-500 kcmil Motor Lead: 4 AWG-500 kcmil Copper Conductors

3MTM Motor Lead Splicing Kits 5300 Series are a series of kits designed for splicing motor lead cables to incoming feeder cables. These kits can accommodate the following splice configurations: Pigtails (stub) connections, 1000 Volts and …

After being crimped onto the cables, the lugs are bolted together in a pigtail configuration, then insulated and sealed with the 3M Motor Lead Splicing Kit. Each kit makes three splices and contains the necessary materials (except lugs) needed to make three splices.

3M 5302 Motor Lead Pigtail Splice, 1 Kv, 1-Hole Lug Connection, Feeder: 2-1/0 Awg, Motor Lead: 4-1/0 Awg,

Motor Lead Pigtail Splice Kit, 1 Hole, 3/4 in. bolt, 2-1/0 AWG, 4-1/0 AWG. Non Shielded, Single Conductor Cable with 1 hole copper lug connector, for Feeder Cable 2 to 1/0 AWG, Motor Lead Cable 4 to 1/0 AWG. This 3 Splice cable is made of EPDM rubber insulation.

2015年8月28日 · This Kit is ideally used with copper compression, 1-hole lugs, and accommodates pigtail connections at 1KV or less. 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for …

3M™ 5300 Series Motor Lead Pigtail Splice Kit contains 3 each of pigtail lug covers, mastic sealing strips, tubes of silicone grease, and locking pins plus an instruction sheet. It is designed for use with copper compression, 1-hole lugs. Its slip-on lug cover has EPDM rubber construction while the mastic strips in the kit seal moisture.

It is designed to splice motor lead cables to incoming feeder cables, including the accommodation of pigtail (stub) connections at 1000V or less. The kit can make 3 splices and can be used on cables that can withstand a maximum temperature of 194 degrees F (90 degrees C).

3M™ Motor Lead Pigtail Splice Kits are designed for splicing motor lead cables to incoming feeder cables, including the accommodation of pigtail (stub) connections at 1000 volts and less. The splice’s main component, the slip-on lug cover, is made from EPDM rubber.