Pre-machine and reinforce frame members for hardware in accordance with manufacturer's standards and door hardware schedule. ... 9 lbs. missile @ 50 fps, minimum 3 impacts, no rips, tears, or penetrations. Static Air Pressure, TAS 202. …

2013年4月4日 · To provide superior structural integrity, intermediate vertical members shall be used - with spacing between verticals to be less than 50% of the gate frame height. Entire gate frame (including counterbalance section) shall include 2 adjustable stainless steel cables (minimum 3/16”) per bay to allow complete gate frame adjustment (maintaining ...

Anodized aluminum frame and panels made of painted steel. Main metallic elements made of stainless steel. Diagram in the front panel with distribution of the elements similar to the real one.

CCSDS 131.0-B-4 specifies a number of low-density parity-check (LDPC) codes for the coding of either a Transfer Frame or a stream of Sync-Marked Transfer Frames (SMTFs). ECSS-E-ST-50-01 did not include any LDPC codes.

Rolling Counter Doors with Integral Frame / Coiling Counter Shutters with Integral Frame. GENERAL NOTES TO SPECIFIER: This specification section has been prepared to assist design professionals in the preparation of project or office master specifications.

The gate and operator system includes a TYM-VS2-2 variable speed gate operator, gate section, frame, structural stiffeners, imbeds, wheels, trolleys and controls to provide a fully operational gate system.

1) Estructura inoxidable (aluminio anodizado) TENDER SPECIFICATIONS. Structural Specifications: Stainless frame. Screws, nuts, plates and all the metallic elements in stainless steel. Diagram in the front panel with distribution of the elements similar to the real one. Quick connections for adaptation to feed hydraulics source. Technical Data.

Set frames plumb, square, level at correct elevation, in accordance with Section 05 50 00. Allow for deflection to ensure that structural loads are not transmitted to frame. Adjust operable parts for correct clearances and function. Install and adjust perimeter and bottom acoustic seals.

2025年2月21日 · -30°C to +50°C 20 kA -40°C to +50°C 25 kA -50°C to +40°C 15 kA 3 12 kA 3 TLF -40°C to +50°C 4 kA 2.9 kA 2 ... The frame members and/or structural support braces shall be hot dipped galvanized steel. Unless otherwise specified in the quotation request anchor bolts will be provided by the purchaser. All anchor bolts shall be sized as ...

A substation frame accessory shall be available for NOVA NX-STS mount for substation applications. The substation frame shall allow the NOVA NX-STS to be oriented upright (90°), or tilted at an angle (39°) using the same frame.