2025年2月20日 · Microstructural examination showed that the five pass FSPed AA6082/SiC SCs exhibited finer grain structure and better dispersion of SiC nanoparticles. Mechanical and …

2013年12月1日 · In this study, 5-pass overlapping FSP was performed on a commercially pure copper plate. The aim is to understand the effect of the TZ on the microstructural evolution and …

2006年5月1日 · Further, the 5-pass FSP sample in various microstructural regions exhibits strength and ductility values comparable to those achieved in the single-pass FSP sample …

2020年5月29日 · The five-pass overlapping FSP resulted in ductility enhancement while the strength remained inferior to that of parent metal due to thermal softening during FSP. On the …

2018年6月25日 · In this study, friction stir processing (FSP) was used to fabricate in-situ surface composite based on Al-Cu system on 1060 Al substrate. The effects of the number of FSP …

Friction stir processing (FSP) was applied to modify the microstructure of an as-cast A356 alloy. The effects of rotation rate, travel speed, in situ FSP pass, FSP direction, and artificial...

In the present study, a large-area stir zone (SZ) was fabricated in AA2014 alloy using multi-pass friction stir processing (FSP) with pin overlapping. The microstructure evolution, …

2022年4月3日 · The results revealed that refined grain structures with predominant high-angle grain boundaries were made in the stir zone in the 5th pass FSP due to severe plastic …

In the present study, a large-area stir zone (SZ) was fabricated in AA2014 alloy using multi-pass friction stir processing (FSP) with pin overlapping. The microstructure evolution,...

Ma et al. (2006a,b) applied five-pass FSP (with 50% overlap) on cast Al–Si–Mg A356 alloy and it was found that overlapping FSP did not exert a significant effect on the size and distribution …