2014年9月26日 · Quick question, Is the "Advertise 802.11d and 802.11h Capabilities" option a requirement for DFS to work?Or is setting the regulatory domain correctly enough to abide by the DFS laws?

Some manufacturers (such as Aruba) have 802.11d disabled by default, is this due to possible compatibility issues or is its use simply outdated? Does the use of 802.11h always also include 802.11d? Is this usually activated automatically as soon as …

2014年4月17日 · That is weird as the specs online say it supports 802.11h. So I setup a packet capture. The card negotiates the connection right up to doing part of the EAP exchange (they use PEAP) and then part way through the exchange the card just stops responding to …

Also Enable " Advertise 802.11d and 802.11h Capabilities " under AP Configuration>802.11a radio profile>Advanced This Enable the radio to advertise its 802.11d (Country Information) and 802.11h (TransmitPower Control) capabilities. This standard provides Dynamic Frequency Selection (DFS) and Transmit Power Control (TPC) to the 802.11a

2023年10月30日 · Then what about Advertise 802.11d and 802.11h Capabilities: in 5GHz radio? In our place we have 152 APs and roaming issue, os are diffrenet such as IOS devices, Win, Linux, and..... then what is the best way to optimize roaming? in this document propose to enable 802.11R for fast roaming "RF and Roaming Optimization for Aruba 802.11ac Networks ...

Channel Switch Announcement (CSA), as defined by IEEE 802.11h, enables an AP to announce that it is switching to a new channel before it begins transmitting on that channel. This allows the clients, who support CSA, to transition to the new channel with minimal downtime.

2024年6月5日 · in Ap group-->radio--> 6ghz we have enabled Advertise 802.11d and 802.11h and also CSA with defaul number(4). Spectrum Monitoring: is disbale Beacon Rate is default

2014年7月9日 · Skip main navigation (Press Enter). Log in. Toggle navigation

2012年1月6日 · Firstly, an access point can advertise a transmit power constraint lower than the regulatory limit in the same way as 802.11h but in both the 2.4GHz and 5GHz bands. Secondly, 802.11k transmit power control and link reports allow a client to discover how its signal is heard by the access point, including a link margin figure, so it can reduce ...

2019年3月21日 · Requirement: Aruba Controllers and VM's should be running minimum AOS: 8.1.x and above . Solution: Starting from AOS: 8.1.x the 5 GHz (802.11a) and 2.4 GHZ (802.11g) radio profiles include an EIRP Offset parameter that allow you to manually adjust EIRP levels by defining an additional EIRP offset value (from-6 to 6 dB) …