1960's - 70's GM A-Body Stationary OEM Installation Details. So you have reached the point of needing to install your windshield or rear window of your late 60’s – early 70’s GM A-body and you’d like to know just how the factory did it.

2022年1月7日 · In the world of GM automotive restoration there are few tasks more frustrating than installing rear window trim on a 1966/67 A-Body 2 door hardtop. The tunnel rear window design is very...

2023年12月11日 · Got new glass for my 67 and then did homework to install. Used the 67 Fisher Body Service Manual (Section 4) and tried to use the recommended spacer blocks...

• Remove the window by sliding the track off the rollers on the glass and the channel on the bottom of the glass off the regulator roller. • Remove the front track or place it at the rear of the quarter panel. • Remove the 4 bolts holding the quarter window regulator in …

2007年4月13日 · Re-installing the rear glass this week. I cleaned the channel up, the clip studs are all fine. Using butyl tape to install with some urethane after like Martin SR's notes say. Using pinchweld primer all around. Question - Why do you put the ribbon on the window, then install? Would it work to put the ribbon on the pinchweld then place the ...

2007年4月30日 · First is how the rear window sits in the rear channel in my 64 hardtop - does this appear to be the correct rear window? Next is pics of the STEELE brand gasket. It almost seem the rear window should be installed from the inside of the car.

2020年12月5日 · Rear window stainless reveal from a 68 or 69 donor is rarely available and sells for 300 to 500. I bought a incomplete set and waited years for the one missing piece to come to me. Staying with the 67 type may be the best plan.

Explore our rear window and seal for Chevrolet/GMC Trucks 1967-72, Blazer and Jimmy 1969-72, Suburban 1967-72. Ideal for revamping and personalizing.

2009年3月22日 · There were 2 different Barracuda rear windows to tool up for. Everytime I see a 67 Barracuda I look around the glass. There is always some trim missing, no trim at all just the gasket, or has been converted to the 68 or 69 stainless. The corners are always gone it seems.

2014年3月13日 · I just purchased a 67 Lemans that has had a body off "restoration" to this point. The body is on the frame, the engine and transmission is in the car. When they did the body/paint work the pins around the windshield and rear window frame were taken off. I now have a painted relatively smooth area where the clips for the trim are supposed be.