SYS 1 provides the XPDR/TCAS functions. Note: On the SURV/STATUS & SWITCHING page of the MFD, the XPDR/TCAS SYS 1 (2) buttons are automatically updated. Back to Pedestal. The A380 Flight Deck Surveillance Panel description.

RMP in the A380X. The RMPs are not yet fully implemented in the A380X. They can be used for the pilot <-> ATC communication with VHF and squawk code entry. Currently no other features are available. The RMPs are planned to be fully implemented in the future. Below we will only describe the features that are currently available in the A380X.

Now the RMP, ACP and XPDR/TCAS CP are combined into a new single control panel known as the RMP (Radio and Audio Management Panel) The RMP builds on the service-proven design from the A380 and A350, but takes into account the desire to implement new functions, as well as the physical installation constraints of the A320 and A330 cockpits.

This guide will help you with preparing and powering up the Airbus A380. It includes images to help you understand the locations of all buttons and switches.

2024年11月18日 · To enter a new code the previous one has to be cleared first using the CLR key. The Transponders are powered on by setting the Mode Selector knob (1) to AUTO (activates airborne) or ON (activates immediately) position. The Altitude Reporting Switch (3) in the ON position sends barometric altitude data, equivalent to Mode C.

驾驶舱应答机（Transponder，又称询答机，有时简称XPDR [1] 、XPNDR、TPDR或TP），简称应答机，安装在飞机驾驶舱内，是一部能在收到无线电询问信号时自动做出回应的电子设备。

2024年10月21日 · Additionally, we implemented Radio Altimeters (RAs) simulated as three independent units, the Ground Proximity Warning System (GPWS) with messages on the Primary Flight Display (PFD), and the Terrain Display featuring A380-specific animations.

Other designs exist for ATC/TCAS panel, on which TCAS setting on standby is achieved by setting the selector to XPNDR, STBY, ON or OFF, depending on which TCAS control panel is installed. On Gables 10 panel, for example, the selector should be turned from the normal TA/RA position to the ON position to set the TCAS on standby (see Figure 4).

2024年11月18日 · The A400M utilises a combination of the Radio Management Panel (RMP), MFD NAVAIDS page and TCAS Control Panel in order to manage VHF Communications (COMM), Navigation Radios (NAV) and Transponder (XPDR/IFF) respectively.

2024年11月15日 · Now the RMP, ACP and XPDR/TCAS CP are combined into a new single control panel known as the RMP (Radio and Audio Management Panel). This forms part of the new Digital Radio and Audio Integrating Management System (DRAIMS).