2017年11月13日 · Had a question about a custom car build we are doing. We have limited space and the factory condenser will not fit. The factory condenser has a surface area of 344 sq. in. If …

2016年12月8日 · When you add refrigerant initially after the vacuum has held, you can add as a liquid though both sides as the engine will be off. Then you close the high side valve, then you …

2025年2月25日 · Total posts 15021 • Total topics 1903 • Total members 1873 • Our newest member ac_since_88. Board index;

2018年8月21日 · The Car and System My car is a factory AC 1970 Nova. I have swapped the engine for a modern LS engine, but I've kept the factory AC "suitcase" on the firewall, retaining …

2021年7月6日 · This is obviously not practical for an A/C shop working on a customer car. I'd suggest testing with pressure, a small charge of R134a, low enough pressure to make sure it's …

2024年8月21日 · The car was bought in Kentucky when they lived there and is now in Missouri. They have decided to not fix the AC since the car is just an extra vehicle and is not used all of …

2024年8月20日 · The power wire at the compressor connector only had power on it when the car was running. Key on, engine off there was no power at the connector. There was a ground on …

2021年5月20日 · Also, there is no chance of slugging the compressor when filling liquid in the high side (can upside down) as it's on the other side of the AC system. Has anyone done it …

2021年9月15日 · I'm curious if having various hose sizes will cause problems when updating an old car AC system. I'm replacing the condenser in this phase. My old system was like this: Hi …

2021年7月29日 · The bad thing is that my car is earlier than the original CR design was for, so some of the « easy » installation cues aren’t available in my existing ventilation system. Even …