Designation: C 33/C 33M – 08 Standard Specification for Concrete Aggregates1 This standard is issued under the fixed designation C 33/C 33M; the number immediately following the designation indicates the year

Order information: ACI documents are available in print, by download, on CD-ROM, through electronic subscription, or reprint and may be obtained by contacting ACI. Most ACI standards and committee reports are gathered together in the annually revised ACI Manual of Concrete Practice (MCP). American Concrete Institute 38800 Country Club Drive

2023年8月17日 · AbstractThis specification defines the requirements for grading and quality of fine and coarse aggregate for use in concrete. Fine aggregate shall consist of natural sand, manufactured sand, or a combination thereof. Fine aggregate shall be free of injuri.

This standard is issued under the fixed designation C 33/C 33M; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval.

C33–03 2. TABLE 2 Grading Requirements for Coarse Aggregates Size Number Nominal Size (Sieves with Square Openings) Amounts Finer than Each Laboratory Sieve (Square-Openings), Mass Percent 100 mm (4 in.)

In all cases only the current version of the standard as published by ASTM is to be considered the official document. This standard is issued under the fixed designation C33/C33M; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision.

fine and coarse concrete aggregate is ASTM C33/C33M. Manufactured aggregates may be either by-products of an industrial process, such as blast-furnace slag, or products of

2024年9月25日 · This standard is issued under the ®xed designation C33/C33M; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision.

2023年8月1日 · Published by ACI on May 1, 2017 This guide is based on the current knowledge and practices for the design, construction, and maintenance of concrete site pavements for industrial and trucking facilities, emphasizing the aspects of...