
Activated Sludge Process Explained | ASP - Sewage Treatment
The Activated Sludge Process (ASP) is a sewage treatment process in which air or oxygen is blown into raw, unsettled sewage to smash the solids and develop a biological 'soup' which digests the organic content and pollutants in the sewage.
Model predictive control of an activated sludge process
2011年1月1日 · The ASP, as shown in Fig. 1, is structured into two lanes, each separated into one mixed pocket and five surface-aerated pockets. Relevant technical specifications for this process are provided in Table 1.
Optimising Flow and Load Distribution at a Sewage Treatment …
Civil engineering structures are used to distribute the flow and solid loads to multiple settling tanks or Activated Sludge Plant (ASP) lanes at a Sewage Treatment Works (STW).
Monkmoor STW (2024)
2024年12月15日 · The existing site consists of an inlet works, four storm tanks, four primary settlement tanks, four ASP lanes, four final settlement tanks, and a sludge treatment facility, which digests indigenous and imported sludge from surrounding sites. The table below shows the current and revised:
The site, built circa 1974, is a five lane Activated Sludge Plant (ASP) operated in a conventional anoxic/aerobic configuration, with the anoxic fraction comprising 7% of the total volume. The works currently has a 20:30:5-10 (BOD/SS/AMM) consent.
Mixing in Anoxic Zones | MMI Joins Thornton Tomasetti
MMI was appointed by a UK water company, which was constructing two new ASP lanes as part of an improvements scheme, to assess the anoxic zones using Computational Fluid Dynamics (CFD).
Three Steps to Improve Your Activated Sludge Process Efficiency
2016年10月13日 · On the bottom left panel is an activated sludge system showing all three things we're going to talk about. And on the right side is an aeration tank from a local water resource recovery facility.
Guildford STW (2023) - Water Projects Online
2023年8月31日 · The activated sludge treatment tank consists of four ASP lanes. Each ASP lane has a selector tank followed by an anoxic zone and then the three aerobic zones. The main aeration lane will be fitted with aeration pipework and fine bubble diffusers. The aeration vessel is 80m long and 6.1m wide with a water depth of 7.05m.
Energy saving potential of using real-time BOD monitoring in …
2021年10月1日 · Ammonia, Dissolved Oxygen (DO) and Total Suspended Solids (TSS) are the most commonly measure parameters in all ASP lanes. Ammonia is a key parameter in wastewater that has a reduction and compliance limit. Ammonia is removed during the ASP by autotrophic bacteria completing biological nitrification.
Complex pipework at Oldham WwTW - SGC
2016年7月1日 · As the large buried pipework sub-contractor, we were part of the team modernising the Oldham site which included installing 900mm ductile iron pipework into the ASP (activated sludge plant) distribution chamber. The pipes were to drain the ASP lanes into the final settlement tanks.
- 某些结果已被删除