2020年3月20日 · For some reason I wanted to see what the Fan Turning option did and didnt realize it said "Detect the lowest fan speed in the system" in the description. The system did a "Detecting your fan speed" and I had to wait. When it was finished it said: Cpu fan 1 minimal duty = 20% Chassie fan 1 minimal duty = 25% Chassie fan 2 minimal duty = 20%

2021年1月18日 · If your AIO is for the CPU (probably yes). Connect the FAN in the CPU_FAN header. Because that's your new CPU cooler. As for the pump. You can use any Water Pump header. I prefer to run the PUMP at constant speed. Not variable, so you can also check this.

2020年1月26日 · For my B450M Steel Legend is one callwd A-Tunning, that control all the fans and have a very broken system of cpu overclocking like ryzen master (the only option that might actually works is the offset voltage) for every Asrock mobo just go to the link page of your model and go to "Download" page in the support main page

2021年3月14日 · wow. thanks for this. i have a full waterloop with an asrock b550i pg. originally just looking for hysteresis, but now i can mix both the cpu/gpu temps and whichever is higher will take priority over the pump/fan speeds. works great.

2023年10月8日 · If you use multiple fan headers you can fine tune the intake and exhaust. I like positive pressure, so more intake than exhaust. Each header can be associated with a temperature sensor. It seems to be CPU or MB for most ASRock boards.

2023年3月4日 · Curve is up to u, it is based on Junction/hotspot so that is confusing. I set 70c to around 50% fan, 95c to 95%, never goes that high, just in case. Fyi, couldnt get mine (Asrock) to drop below 1000 rpm, even with my settings and Zero rom mode on. So after years of Amd fan curves, im ezperimenting with leaving on auto, and it does power down now.

2020年7月18日 · I have two arctic p12 pwm pst fans daisy chained to the CHA FAN/WP header next to the CPU 2 fan header on my Asrock Phantom Gaming 4 x570 ITX TB3 board. In the bios I tried to set the CHA fan mode to PWM and then speed to full speed but in the monitoring in the screen above the options the CHA FAN RPM says “N/A”

2023年8月17日 · ASRock is one of the few brands that have good customs that you could find at or below MSRP, (my 7900 XT PG costs 780€ i.e.) Still.. personally I'm still in doubt about my choice.. coming from a MSI 3070 Gaming X Trio is hard to go away from DLSS and decent RT.. but since 7900 XT is made for 4K, while I play only at 1440p, I hope to have ...

2024年1月12日 · I have a X670E Taichi and have found that using the fan curve editor (Fantastic or something like that) doesn’t work correctly. I expand each of the fan settings and set a custom curve, e.g., 30% at 30C, 30% at 45C, 45% at 60C, and 60% at 75C. This keeps the fans slow and quiet until temps rise.

2023年10月24日 · My fans are powered by SATA power to 4x 4-pin fan connectors splitter that gets fan speed PWM signal from GPU and power from that other adapter. Fans are connected to eachother with Akasa pci-e fan bracket kit (I used only the brackets between fans) and to GPU with tiny zipties. I made custom fan curve in AMD adrenaline software.