
Chapter 4: Accessible Routes - United States Access Board
Clearances at power-assisted doors and gates shall comply with 404.2.4. Clearances at automatic doors and gates without standby power and serving an accessible means of egress shall …
404 Doors, Doorways, and Gates - ADA Compliance
404.1 General. Doors, doorways, and gates that are part of an accessible route shall comply with 404. EXCEPTION: Doors, doorways, and gates designed to be operated only by security …
Guide to the ADA Accessibility Standards - United States Access …
Requirements for doors, doorways, and gates in §404 apply to those that provide “user passage” (§206.5). Doors serving walk-in closets or pantries must comply.
U.S. Access Board - Chapter 4
Accessible routes shall consist of one or more of the following components: Walking surfaces with a slope not steeper than 1:20, doors and doorways, ramps, curb ramps excluding the flared …
CHAPTER 4 ACCESSIBLE ROUTES - 2009 ICC A117.1 - 2009 - ICC …
Doors and doorways that are part of an accessible route shall comply with Section 404. 404.2 Manual Doors. Manual doors and doorways, and manual gates, including ticket gates, shall …
Door and Gate Surfaces: ADA Standard Section 404.2.10 - Corada
2015年5月5日 · Section 404.2.10 covers the current ADA Standards for door and gate surfaces on manual doors and gates.
Doors, Doorways, and Gates: ADA Standard Section 404 - Corada
Advisory 404.1 General Exception. Security personnel must have sole control of doors that are eligible for the Exception at 404.1. It would not be acceptable for security personnel to operate …
404.2 Manual Doors, Doorways, and Manual Gates - UpCodes
Manual doors and doorways and manual gates intended for user passage shall comply with 404.2. Revolving doors, revolving gates, and turnstiles shall not be part of an accessible route. …
Manual Doors, Doorways, and Manual Gates: ADA Standard Section 404…
2015年5月5日 · Section 404.2 covers the current ADA Standards for manual doors, doorways and manual gates that are part of an accessible route.
Door and Gate Surfaces - UpCodes
Existing doors and gates without smooth surfaces within 10 inches (255 mm) of the finish floor or ground shall not be required to provide smooth surfaces complying with 404.2.10 provided that …
- 某些结果已被删除