2009年10月10日 · `Agfacolor CNS´ (without number) was the designation of the film which in 1968 replaced the Agfacolor 17M (double-masked). It took the same Agfacolor-process. Agfacolor films never used C-22, but skipped it and used C-41 since 1978.

2008年12月9日 · I have never tried processing Agfa CN17 or CNS films in C41 as I know the emulsion will melt, but I have read about processing in C41 at 20C and getting good results. Here are some details and samples from flickr

General purpose color film (CNS=Color Negative Special). Integral double mask as for 17S but higher speed. Suggested to be developed as black and white. Film Format: 35mm film. Film type: Black and White Film. ISO: 80. If this is an expired film, it …

2024年6月23日 · It tuns out CNS (Colour Negative Special) was a film from Agfa available between 1968 and 1975 (so I think we can safely call this a 50 year-old film) and which used a proprietary Agfa development process. Later on in the 70s, Agfa switched to C41.

Agfa-Gevaert introduced 126 roll size films in 1968, five years later than the “Kodapak” 126 cartridge films for Kodak Instamatic camera range (from 1963). The Agfa film was available in two colour film types, viz: CT = transparency film and CN …

I think the film you have might require a special Agfa process that isn't commonly available. You might try one of the vintage film processing services (listed here). Process C-22's site specifically mentions "Agfacolor CN17, CNS or CT18" as ones that they do.

Agfacolor was a series of color film products made by Agfa of Germany. The first Agfacolor, introduced in 1932, was a film-based version of their Agfa-Farbenplatte (Agfa color plate), [1] a "screen plate" product similar to the French Autochrome.

2023年8月17日 · Agfa CNS process is very close to ORWO/Sovcolor. The formulas are published in multiple sources and the components are not very hard to source. Unless you have a fridge full of cold-stored Agfacolor the end results rarely worth the effort.

2024年6月23日 · 5 Frames with expired Agfa CNS in a Rollei A110 and processed in expired chemicals. This subminiature stuff tends to drag you in.. While looking at various ways of reloading and re-using 110 cartridges recently, I remembered that I’d come across some 110...

2024年6月20日 · I salvaged an old Agfa CNS 12-exposure cartridge and set about it with the razor saw. The three parts of the 110 cartridge. The spool (with backing paper attached), the bridge (with lower parts of the chambers sawn off, and the main body (with the lower parts of the chambers glued in place).