Do not connect an Apple IIc, IIGS, III, III Plus, or Macintosh II video card device or cable to the EtherTalk Interface Card. The interface cards covered in this table include The EtherTalk Interface Card and EtherTalk NB Card.

Note: The signals at the Dsub-15 on the Apple IIc are not the same as those at the Dsub-15 end of the Apple III, Apple IIGS, and Macintosh II. Do not attempt to plug a cable intended for one into the other.

15 pin D-SUB male connector at the Apple computer, looking into cable-side connector.

2015年6月17日 · So, I just needed to find the pinout for this monitor and the Apple IIgs RGB port and make a converter. This turned out relatively easy because it turns out “Don Lancaster’s Hardware Hacker” has an article on alternative RGB monitors for the Apple IIgs, and he has a …

2013年11月25日 · Apple Tech Info Library - Apple II Hardware: IIc External Pinouts Addeddate 2013-11-25 07:51:56 Collection_added manuals Foldoutcount 0 Identifier IIc_External_Pinouts Identifier-ark ark:/13960/t5p86nw0x Ocr ABBYY FineReader 9.0 Pages 4 Ppi 300 . plus ...

For most situations, you will simply connect the 15 Pin D type connector to the Apple IIc/IIc+ via the supplied ribbon cable and connect your VGA monitor to the VGA port. ** Please be aware, the A2VGA output is VGA 720x480 resolution. This may not work on some older VGA monitors. **

2023年6月19日 · This was a special-purpose video connector for adapters to digital RGB monitors or RF modulators. The Apple IIc has two text display modes. TEXT: 40-column; TEXT80: 80-column; The graphic modes of the Apple II series were peculiar even by the standards of the late 1970s and early 1980s.

Reference material for the Apple II/II+/IIe and IIc: Reference material for the Apple III and III Plus: Reference Manuals, Schematics and Documentation. The documents found on this website are the same documents used to research, understand and implement the projects we did.

2016年3月21日 · Native RGB – This is the included 15 pin connector that works only with the Apple Color RGB monitor. The normal way to connect a IIgs to the Apple RGB monitor: VidHD HDMI Video card. The new VidHD generates 1080p output via HDMI connector, allowing you to connect any Apple II, including Apple IIGS to a modern monitor or TV via HDMI.

Due to frequency difference, the strapping in the pinout must sometimes be artificially set to the next lower resolution type in order to work. In other words, an 1152 x 870 VGA monitor at 60 hz will only be capable of 1024 x 768 at Apple's 75 hz.